K3V112 10CC Internal Leakage hydraulic pump

K3V112 10CC Internal Leakage hydraulic pump

5 day ago

0 0

Ningbo Hengnuo Hydraulic Drive Co.,Ltd

 3 year year

Product details

K3V112 10CC Internal Leakage Hydraulic Pump: Technical Analysis & Solutions

(English Translation with Enhanced Technical Depth)

------

1. Subject Definition & Core Concepts

• Model Identification: K3V112 10CC Pump

• Model Breakdown:

• K3V112: Avariable displacement axial piston pump(e.g., manufactured by Kawasaki or similar OEMs), commonly used in heavy machinery (e.g., excavators, cranes, loaders) for high-pressure hydraulic systems (28–35 MPa).

• 10CC: Theoretical displacement of10 cubic centimeters per revolution (10 mL/rev), directly determining the pump’s flow output capacity.

• Applications:

• Drives critical functions likeswing systems, travel motors, or boom actuators, requiring durability under cyclic loading and high-pressure conditions.

• Definition of Internal Leakage

• Physical Mechanism: Unintended flow of hydraulic fluid fromhigh-pressure zones(e.g., piston chambers, valve plate) tolow-pressure zones(e.g., case drain, leakage ports), resulting in:

• Reduced volumetric efficiency(normal ≥92%; severe leakage <85%).

• System malfunctions: Delayed actuator response, pressure instability, and excessive oil temperature (>80°C accelerates seal degradation).

------

2. Root Causes & Detection Methods for Internal Leakage

(1) Key Failure Points & Mechanisms

【表格】

Component Failure Mode Root Causes

Piston-Barrel Interface Wear, scoring, clearance increase Contaminated oil (particles ≥5 μm), prolonged high-pressure operation (>32 MPa), inadequate lubrication

Valve Plate/Port Plate Eccentric wear, burnt sealing bands Misalignment, abnormal backpressure, thermal expansion mismatch

Shaft Seals O-ring aging, lip seal damage Excessive axial loads, oil temperature overshoot (>90°C), incompatible seal materials

Housing Cracks Casting defects, stress fractures Fatigue loading, impact overloads, low-temperature embrittlement

(2) Quantitative Detection Methods

• Method 1: Flow Rate Testing

• Procedure:

1. Isolate the pump outlet and run the motor at rated speed (e.g., 1,800 rpm).

2. Measure the leakage flow rate (L/min) at the case drain port.

3. Calculateleakage displacement:

Qleak=(Flow Rate (L/min)Speed (rpm))×1,000(in cc/rev)Q_{\text{leak}} = \left(\frac{\text{Flow Rate (L/min)}}{\text{Speed (rpm)}}\right) \times 1,000 \quad (\text{in cc/rev})Qleak=(Speed (rpm)Flow Rate (L/min))×1,000(in cc/rev)

• Acceptance Criteria:

• New Pump: ≤0.3 cc/rev (≥97% volumetric efficiency).

• Repaired Pump: ≤0.8 cc/rev (≥92% volumetric efficiency).

• Requires Repair: >1.0 cc/rev (>10% leakage rate).

• Method 2: Pressure Decay Test

• Procedure:

1. Isolate the pump from the system and charge it to rated pressure (e.g., 32 MPa).

2. Close inlet/outlet valves and record the time (T) for pressure to drop to 28 MPa.

• Acceptance Criteria:

• Healthy Pump: T ≥15 minutes (leakage rate ≤0.1 MPa/min).

• Requires Repair: T <5 minutes (leakage rate >0.8 MPa/min).

You May Also Like

Contact Now

If you are interested in the product, contact 2bvideo.com for more information for more information

To:: Ningbo Hengnuo Hydraulic Drive Co.,Ltd

Message:

Submit

Disclaimer：

The information of 2bvideo.com limited shown above is provided by the user or collected on the network. Video 2B does not guarantee the authenticity,accuracy and legitimacy of 2bvideo.com limited information. Video 2B does not involve legal relationships and disputes between users arising from transactions other than secured transactions on this website. Disputes shall be settled by you through negotiation. If you are the person in charge or relevant employee of this enterprise, if you find that the enterprise information is incorrect or want to manage thiscompany, please contact us jacklee1558@gmail.com, after you claim the enterprise, you can obtain management permission, publish supplyand demand information, bring consulting orders, and remove page advertisements.

Ningbo Hengnuo Hydraulic Drive Co.,Ltd

 Audited supplier

3 year

Address: Ningbo, China

Main Product: hydraulic motor, gear box, hydraulic pump, hydraulic valve , hydraulic winch, hydraulic system

 Contact now