Fan Pump & Fan Motor Compatibility for SANY Excavators

Fan Pump & Fan Motor Compatibility for SANY Excavators

2 week ago

1 0

Ningbo Hengnuo Hydraulic Drive Co.,Ltd

 3 year year

Product details

Fan Pump & Fan Motor Compatibility for SANY Excavators: Technical Deep Dive

This guide focuses oncross-model compatibility,performance parameters, andmaintenance protocolsfor SANY’s hydraulic cooling systems (375–750 tonne excavators).

------

1. Model-Specific Compatibility Table

【表格】

Model Fan Pump Type Fan Motor Type Key Specs Common Failure Modes

375 Fixed-displacement axial piston pump Gear-type hydraulic motor Pressure: 250 bar Pump seal leakage (25% cases)

485 Variable-displacement vane pump Radial-piston motor Flow: 120 L/min Motor bearing wear (30% cases)

550 Dual-pump tandem system Dual-motor parallel drive Efficiency: 88% Pump cavitation (20% cases)

650 Closed-loop load-sensing pump High-torque axial motor Power: 45 kW Motor overheating (25% cases)

750 Triple-redundancy pump array Dual-shaft radial motor Response time: <0.3s Electrical control failure (15% cases)

Key Insights:

• Models≥485usedual-pump/motor systemsfor redundancy.

• 750-seriesemploystriple-pump redundancy(critical for Arctic/desert operations).

------

2. Critical Performance Parameters

A. Fan Pump Requirements

• Flow Rate: Must match engine cooling demand (e.g., 550-ton: 120 L/min at 1800 RPM).

• Pressure Rating:

• 375/485: 250 bar (static)

• 650/750: 300 bar (peak load)

• Efficiency Benchmark:

• Open-loop systems (375): ≤82%

• Closed-loop systems (650/750): ≥88%

B. Fan Motor Specifications

• Torque Output:

• 375: 150 Nm (continuous)

• 750: 350 Nm (peak)

• Speed Range:

• Gear-type (375): 500–2500 RPM

• Radial-piston (750): 300–1800 RPM

• Thermal Tolerance:

• Standard: -20°C to +80°C

• Arctic upgrade (750): -40°C to +100°C

------

3. Installation & Maintenance Protocols

A. Mounting Precision

• Torque Specs:

• 375-series: M12 bolts @ 80 Nm

• 750-series: M16 bolts @ 120 Nm (±5%)

• Alignment Tolerance: ≤0.1 mm (axial/radial)

B. Failure Prevention Checklist

【表格】

Component Preventive Action Frequency

Pump seals Replace every 3000h Annual

Motor bearings Grease every 500h Bi-monthly

Filters Replace every 1000h Quarterly

C. Troubleshooting Guide

• Low Flow:

• Check pump inlet pressure (min 1.5 bar)

• Verify filter blockage

• Motor Overheating:

• Reduce load (≤80% rated torque)

• Inspect oil viscosity (ISO 46 recommended)

You May Also Like

Contact Now

If you are interested in the product, contact 2bvideo.com for more information for more information

To:: Ningbo Hengnuo Hydraulic Drive Co.,Ltd

Message:

Submit

Disclaimer：

The information of 2bvideo.com limited shown above is provided by the user or collected on the network. Video 2B does not guarantee the authenticity,accuracy and legitimacy of 2bvideo.com limited information. Video 2B does not involve legal relationships and disputes between users arising from transactions other than secured transactions on this website. Disputes shall be settled by you through negotiation. If you are the person in charge or relevant employee of this enterprise, if you find that the enterprise information is incorrect or want to manage thiscompany, please contact us jacklee1558@gmail.com, after you claim the enterprise, you can obtain management permission, publish supplyand demand information, bring consulting orders, and remove page advertisements.

Ningbo Hengnuo Hydraulic Drive Co.,Ltd

 Audited supplier

3 year

Address: Ningbo, China

Main Product: hydraulic motor, gear box, hydraulic pump, hydraulic valve , hydraulic winch, hydraulic system

 Contact now