Zhongrou Baby Pull Up Diapers: Breathable "Air Pillow" Keeps Baby Dry and comfortable 24 hours a day
When new parents feel the wet sweat stains on the baby's thighs, when they change diapers in the early morning and find red marks on the lower back, these details are telling: the real "most suitable diaper for babies" must not only have the hard power to hold urine, but also be as gentle and comfortable as a mother's embrace. Zhongrou Holdings and the German Maternal and Infant Laboratory have launched a new "air pillow series" disposable diapers, redefining "comfort" with 3 core technologies, making each diaper an invisible guardian of baby's skin.
3D Breathable Layer + High-Power Bottom Film: Equip The Butt With A "Breathing Valve"
Traditional diapers accumulate moisture like a steamer, and the best diapers for newborns adopt a double-layer composite breathing system:
Surface layer: double-sided 3D hot-pressed air layer, woven into a honeycomb mesh with 0.6 denier microfiber, containing 3000+ breathable micropores per square centimeter.
Bottom layer: 0.02mm medical-grade breathable membrane, with a pore size precisely controlled at 4 microns (water vapor molecule diameter 0.0004 microns, liquid water molecules about 200 microns) Laboratory infrared thermal imaging shows that after the baby wears it for 2 hours, the surface temperature of the buttocks is always maintained at 32.5℃ (ordinary diapers reach 35.8℃), and the humidity sensor actually measured that the moisture content of the contact surface was reduced by 62%, truly realizing "moisture is discharged in seconds, and dryness stays forever".
110mm Wide Core: Urine Becomes "Invisible" In One Second
Ordinary diapers have narrow cores and slow absorption speeds, and liquids are easily accumulated locally. Zhongrou's innovative wide-width diversion technology:
Horizontal diffusion: The 110mm ultra-wide core is 30% wider than conventional products, and with 1,200 diversion grooves, urine diffuses to both sides instantly upon contact.
Vertical absorption: Each gram of polymer water-locking particles can capture 45 times the liquid (about 600ml), and the absorption rate reaches 20ml/second (the industry average is 12ml/second). X-ray perspective images show that even after absorbing 8 times of urine (about 800ml), the core is still uniform and fluffy, completely saying goodbye to the "sandbag feeling" of traditional diapers that clump and fall after absorption.
Double-Layer Hot-Pressed Air Layer: "Cloud Pad" That Will Not Deform No Matter How You Roll
The surface of traditional diapers is prone to collapse and rub the skin under pressure. Zhongrou adopts the "hyperbolic support technology" in aerospace materials:
Surface structure: double-sided 3D hot-pressed air layer, 250 elastic airbag columns implanted per square centimeter.
Compression test: Under a pressure of 500g/cm² (equivalent to an adult's palm pressing), the airbag column is only compressed by 12% and rebounds quickly. Clinical tests show that after wearing for 8 hours continuously, the baby's skin friction coefficient is only 0.08 (ordinary diapers reach 0.35), and the incidence of red marks is reduced by 89%.
Triple Anti-Leakage System: No Leakage When Lying Sideways, Rolling, Crawling
3D three-dimensional guardrail: 4.2cm high anti-leakage edge, embedded with 40 wave guide grooves.
Smart memory foam: temperature-sensitive deformable cotton is implanted on both sides of the core, automatically fitting the curve of the leg root when encountering body temperature.
Hydrophobic isolation layer: 0.03mm ultra-thin hydrophobic film blocks liquid penetration laterally. The laboratory simulates the baby rolling sideways 10 times in a row, and the side leakage rate is only 0.2%, and the anti-leakage performance is 8 times higher than the international standard.
