valve guide driver

2 month ago

3 0

 5 month year

Product details

The valve guide is an important component in the engine valve train, whose main function is to guide the valves (intake and exhaust) to move in a straight line, ensuring precise closure of the valves and valve seat rings, while conducting some of the heat from the valves to the cylinder head. The following is a detailed introduction about valve guides:

1. Structure and Materials

Structure: It is usually a cylindrical hollow tube that is pressed into the guide hole of the cylinder head, and the inner hole is precisely matched with the valve stem.

Material Science:

Cast iron: with good wear resistance and low cost, commonly used in ordinary engines.

Powder metallurgy: containing graphite or copper, with excellent self-lubricating properties, commonly used in modern engines.

Bronze alloy: with outstanding thermal conductivity and corrosion resistance, used for high-performance or high load engines.

2. Core functions

Guidance function: Ensure the valve moves in a straight line, avoiding lateral forces that may cause valve wear or poor sealing.

Heat dissipation: Transfer the high temperature at the valve head (especially the exhaust valve) to the cylinder head to prevent valve overheating.

Lubrication control: The inner hole design should retain an appropriate amount of lubricating oil film, but avoid excessive oil entering the combustion chamber (which may cause carbon deposition or oil burning).

3. Common problems and malfunctions

Excessive wear: The gap between the valve stem and the guide tube increases, leading to increased oil consumption and decreased combustion chamber sealing.

Carbon blockage: Oil residue or fuel impurities may block the guide pipe, affecting valve movement.

Improper installation: Deformation or inaccurate depth during pressing may cause valve sticking or air leakage.

4. Maintenance and replacement

Check the clearance: Use a dial gauge to measure the fit clearance between the valve stem and the guide pipe. If it exceeds the manufacturer's standard, it needs to be replaced.

Replacement steps:

Dismantle the old conduit (using specialized tools or extrusion equipment).

Clean the cylinder head conduit holes.

Press in the new conduit (pay attention to direction and depth, usually requiring a frozen conduit or heated cylinder head for interference fit).

Sharpen or grind the inner hole to match the clearance of the valve stem.

Lubrication suggestion: Apply high-temperature grease during assembly to reduce initial wear.

You May Also Like

Contact Now

If you are interested in the product, contact 2bvideo.com for more information for more information

To:: Jienuo Import and Export Trade Co., Ltd

Message:

Submit

Disclaimer：

The information of 2bvideo.com limited shown above is provided by the user or collected on the network. Video 2B does not guarantee the authenticity,accuracy and legitimacy of 2bvideo.com limited information. Video 2B does not involve legal relationships and disputes between users arising from transactions other than secured transactions on this website. Disputes shall be settled by you through negotiation. If you are the person in charge or relevant employee of this enterprise, if you find that the enterprise information is incorrect or want to manage thiscompany, please contact us jacklee1558@gmail.com, after you claim the enterprise, you can obtain management permission, publish supplyand demand information, bring consulting orders, and remove page advertisements.

Jienuo Import and Export Trade Co., Ltd

 Audited supplier

5 month

Address: Changchun, China

Main Product: truck engine part, truck Transmission part, truck electrical part, truck Braking part, truck steering part, truck body part

 Contact now