rubber inflatable seal Inflation test3

4 month ago

12 0

TIANJIN JINHANG TECHNOLOGY CO.,LTD

 4 month year

Product details

Technical Depth and Problem-Solving Capabilities of Integral Molded Inflatable Seals in Extreme/Special Scenarios

Scenario 1: Inflatable seal of Deep-Sea Exploration Equipment (Pressure ≥110MPa, Temperature 4℃)

1. Extreme Challenges

Dual Effects of Pressure and Corrosion: Deep-sea environmental pressure increases exponentially with depth (1MPa increase per 10 meters), while the salinity of seawater (3.5%) accelerates corrosion of metal components. Traditional seals are prone to leakage due to material creep or stress relaxation.

Dynamic Sealing Requirements: Exploration equipment must withstand sudden pressure changes during ascent and descent (e.g., rapid ascent from a depth of 1000 meters to the surface). Seals must possess elastic compensation capabilities to prevent tearing.

2. Technological Breakthroughs

Material Innovation: Utilizing hydrogenated nitrile butadiene rubber (HNBR) and carbon fiber composite materials, nanoscale carbon fiber dispersion technology enhances the material's tear resistance (≥50MPa) while reducing compression set (≤8% at 110MPa/72h). The surface is coated with a hydrophobic polytetrafluoroethylene (PTFE) layer to reduce seawater penetration. After a salt spray test (500 hours), the surface corrosion rate is ≤0.01mm/year.

Structural Optimization: A double-layer seal inflatable structure is designed. The outer layer is a high-pressure bearing layer (5mm thick), and the inner layer is an elastic compensation layer (3mm thick). Internal air pressure regulation (0.5-1.2MPa) dynamically adapts to pressure fluctuations.

A self-sealing flange design is introduced, allowing for a tighter fit between the flange and the sealing surface under pressure, resulting in a leakage rate ≤0.001L/min (compared to ≥0.1L/min in traditional solutions).

3. Implementation Results

Data Verification: In a deep-sea detector project, the seal operated continuously for 30 days at 110MPa pressure without leakage, extending its lifespan tenfold compared to traditional solutions.

Commercial Value: The customer applied this technology to its entire series of deep-sea equipment, reducing the inflatable gasket cost per unit by 40% and extending the maintenance cycle from 6 months to 3 years.

Contact Now

If you are interested in the product, contact 2bvideo.com for more information for more information

To:: TIANJIN JINHANG TECHNOLOGY CO.,LTD

Message:

Submit

Disclaimer：

The information of 2bvideo.com limited shown above is provided by the user or collected on the network. Video 2B does not guarantee the authenticity,accuracy and legitimacy of 2bvideo.com limited information. Video 2B does not involve legal relationships and disputes between users arising from transactions other than secured transactions on this website. Disputes shall be settled by you through negotiation. If you are the person in charge or relevant employee of this enterprise, if you find that the enterprise information is incorrect or want to manage thiscompany, please contact us jacklee1558@gmail.com, after you claim the enterprise, you can obtain management permission, publish supplyand demand information, bring consulting orders, and remove page advertisements.

TIANJIN JINHANG TECHNOLOGY CO.,LTD

 Audited supplier

4 month

Address: Tianjin, China

Main Product: rubber inflatable seal, silicone inflatable seal, Integral molded inflatable seal, Reinforced fabric inflatable seal, Inflatable seal , silicone inflatable gasket

 Contact now

Disclaimer：