Injection Molding plastic panel frame

Injection Molding plastic panel frame

8 month ago

34 0

ZIBO HUIWEN NEW MATERIAL CO., LTD

 2 year year

Product details

Durable Electronic Plastic Housing for Enclosures

Plastic enclosure electronic boxes form an integral part of the devices that will protect circuit boards, sensors, and electronic components, and the method of injection molding forms the most common way of manufacturing such devices owing to its efficiency and accuracy.

Core Mold Design Requirements for Electronic Boxes

Dimensional Compensation of the Mold to Address Material Shrinkage: Based on the shrinkage rate (0.5%-0.8% ABS; 0.6%-0.9% PC), make sure that the dimensional compensation is made to fit the electronic box and its internal parts such as PCB boards and connectors.
Waterproof and Sealing Structure Design:
Make grooves for rubber seals (the width of 2-3 mm, the depth of 1-1.5 mm) in order to make it IP65/IP67 waterproof.
Use interlocking buckles as well as screw fixing in order to improve sealing and facilitate the process of assembling.
Draft Angle and De-Molding Optimization: Make the draft angle of 1°-3° for both inner and outer walls in order to prevent demolding marks; for complex-shaped electronic boxes, use the core-pulling mechanism to make sure of the easy demolding of deep cavities (threaded holes, ribs, etc.).
Gating System Design: Use submarine or edge gates in order to avoid the marks left by the gates on the surface; for large electronic boxes use multi-gating system in order to provide uniform filling and reduce internal stresses.
Cooling System Design: Evenly arrange the channels for cooling water around the mold cavity (10-15 mm from the surface of the cavity).

HUIWEN MAIN PRODUCTS:

Plastic shell /case /Cover/ Enclosure
Plastic base
Please box
Plastic frame...

Talk to us! Put us to the test!

Application Scenarios

Consumer Electronics: Router enclosures, power adapter shells, smart home control boxes.
Industrial Control: PLC enclosures, sensor junction boxes, industrial instrument housings.
Outdoor Electronics: Monitoring camera enclosures, solar controller boxes, communication base station signal boxes.
Automotive Electronics: Vehicle-mounted control unit enclosures, battery management system (BMS) boxes.

Custom Plastic Part Injection Molding Product 4

Product Categories

Contact Now

If you are interested in the product, contact 2bvideo.com for more information for more information

To:: ZIBO HUIWEN NEW MATERIAL CO., LTD

Message:

Submit

Disclaimer：

The information of 2bvideo.com limited shown above is provided by the user or collected on the network. Video 2B does not guarantee the authenticity,accuracy and legitimacy of 2bvideo.com limited information. Video 2B does not involve legal relationships and disputes between users arising from transactions other than secured transactions on this website. Disputes shall be settled by you through negotiation. If you are the person in charge or relevant employee of this enterprise, if you find that the enterprise information is incorrect or want to manage thiscompany, please contact us jacklee1558@gmail.com, after you claim the enterprise, you can obtain management permission, publish supplyand demand information, bring consulting orders, and remove page advertisements.

ZIBO HUIWEN NEW MATERIAL CO., LTD

 Audited supplier

2 year

Address: Zibo, China

Main Product: Refrigerator Plastic parts, TV Plastic parts, Washing Machine Plastic parts, Air Conditioning Plastic parts, Daily Plastic Parts , Industrial plastic parts

 Contact now

Disclaimer：