Product
Product
Supplier
Search
Get Quote
730 people are quoting
This model belongs to large Hydraulic Metal Balers, with around 400 ton pressing force and a chamber size of about 3000×2000×1200mm. It is suitable for bulky and irregular scrap materials. The finished bale size is usually around 500–1200×600×600mm, and the bale weight for scrap steel can reach about 800–1500kg, depend on material density and feeding condition.
For buyers looking for Ferrous Metal Balers, this machine is suitable for scrap steel and scrap iron processing. Compared with smaller balers, the Y83/T-4000 is better for heavy bales, higher density, and stable bale discharge. The side push-out design is practical for large bales, while manual + PLC automatic operation gives more flexibility for different working sites.
Our company has been established for around 40 years, with our own factory and engineering team. We can provide customized service according to customer’s scrap material, bale size requirement, local voltage, operation mode, and site layout. This is important because many scrap yards have different material condition, not every machine should be same.
Many recycling companies do not only have a scrap volume problem. The bigger problem is that the scrap is loose, messy, and takes too much space. Scrap steel, scrap iron, and metal offcuts are difficult to stack if they are not compressed.
In real operation, customers often face low loading density, high transport cost, slow yard turnover, and too much manual handling. If the baler is too small, the bale weight may be light and the daily capacity may not be enough. For large scrap yards, this can directly affect profit and delivery efficiency.
That is why many customers start to choose heavy duty Metal Baler Machines. The machine is not just for making bales, it helps improve the full scrap handling process.
The Y83/T-4000 400 ton push-out metal baler uses a large chamber, strong hydraulic compression system, and side push-out discharge structure to turn loose scrap metal into dense and regular bales.
Scrap can be loaded into the chamber by crane grab, overhead crane, or other feeding equipment. The hydraulic system compresses the material from different directions. After the bale is formed, it is pushed out from the side for easy handling, stacking, and truck loading.
This solution is suitable for scrap steel, scrap iron, mixed metal offcuts, thin steel sheets, stamping scrap, and some non-ferrous metal waste. For customers who need to supply steel mills, reduce transport cost, or improve yard space utilization, the Y83/T-4000 can make the scrap handling work more efficient and stable.
The key specifications of Y83/T-4000 focus on what buyers usually care about most. This model is a 400 ton push-out hydraulic metal baler. The press chamber is about 3000×2000×1200mm, suitable for bulky scrap materials. The bale size is about 500–1200×600×600mm, and the bale weight for scrap steel is normally around 800–1500kg. Bale density can reach ≥1500kg/m³ under suitable material condition.
The machine uses side push-out bale discharge, which is more suitable for heavy bales. Operation mode is manual + PLC automatic operation, helpful for both testing and daily production. Total power is about 156.5kW. Standard power supply is 400V/50Hz, and it can be customized according to local voltage. The machine weight is about 54 tons, making it a heavy duty Steel Scrap Metal Baler for medium and large recycling companies.
This machine is widely used in large scrap yards, steel mill recycling centers, metal processing factories, waste metal collection centers, and renewable resource companies.
In scrap yards, it compresses loose scrap into regular bales and improves yard space. In metal processing plants, it handles offcuts, stamping waste, and cutting scrap. In steel mill material yards, it helps prepare scrap in a more convenient form for transport and reuse. For companies exporting or transporting scrap metal over long distance, high-density bales can improve loading efficiency.
400 ton pressing force is suitable for bulk scrap steel, scrap iron, and mixed metal waste.
3000×2000×1200mm large chamber reduces material preparation work.
800–1500kg heavy bales are practical for large scrap yards, steel mills, and long-distance transport.
Side push-out discharge supports continuous working and easy bale handling.
Manual + PLC automatic operation fits different operator habits in different markets.
Air cooling system helps keep hydraulic performance stable during longer working time.
During operation, scrap metal is loaded into the compression chamber. After the cover closes, the hydraulic cylinders start pressing the material step by step. Loose scrap is compressed into a rectangular bale inside the chamber. When the bale reaches the required shape, the side door opens and the push-out system discharges the bale.
The whole process is cold pressing, without heating the material. This reduces energy use and makes the machine suitable for daily scrap recycling work. For customers, the main value is not only strong pressure, but also turning loose waste metal into standard bales that are easier to manage.
When choosing a metal baler, buyers should not only compare price or tonnage. First, confirm the main material: scrap steel, scrap iron, thin sheet scrap, stamping waste, or mixed metal waste. If the scrap is bulky, daily volume is high, and the buyer wants bales above 800kg, a 400 ton push-out baler is usually more suitable than small models.
Chamber size is also important. If the chamber is too small, workers need more time to prepare materials. Buyers should also confirm local voltage, feeding method, bale size requirement, and daily working hours. If the customer needs stable long-term scrap steel processing, large Hydraulic Metal Balers like Y83/T-4000 can be a better choice.
It is mainly suitable for scrap steel, scrap iron, metal offcuts, thin steel sheets, stamping scrap, and some aluminum or copper scrap. Final suitability depends on material thickness and hardness.
Not always. The 800–1500kg range is a reference for scrap steel. Actual bale weight depends on material density, feeding method, compression times, and material type.
Yes. The machine can be customized according to local voltage, operation habits, and working site conditions. Export documents can also be provided.
Push-out discharge is more suitable for heavy bales and large machines. It gives more stable bale discharge and makes handling, stacking, and loading easier.
Yes. We have our own engineers and factory. We can provide suitable design according to customer’s scrap type, bale requirement, site layout, and budget.
If you are interested in the product, contact 2bvideo.com for more information for more information
The information of 2bvideo.com limited shown above is provided by the user or collected on the network. Video 2B does not guarantee the authenticity,accuracy and legitimacy of 2bvideo.com limited information. Video 2B does not involve legal relationships and disputes between users arising from transactions other than secured transactions on this website. Disputes shall be settled by you through negotiation. If you are the person in charge or relevant employee of this enterprise, if you find that the enterprise information is incorrect or want to manage thiscompany, please contact us jacklee1558@gmail.com, after you claim the enterprise, you can obtain management permission, publish supplyand demand information, bring consulting orders, and remove page advertisements.
Main Product:
hydraulic metal baler,
metal briquetting press,
horizontal metal shear,
scrap baler shear,
alligator shear,
gantry shear
