Product
Product
Supplier
Search
Get Quote
730 people are quoting
The JH-35 is a fully automatic electric cable stripping machine designed for heavy-duty wire processing applications. Unlike traditional pneumatic strippers that require compressed air, the JH-35 is fully electric – no air source needed, making it ideal for workshops and production lines without air infrastructure.
The machine features an 8-wheel drive system with dual-side pressure rollers, delivering powerful and precise wire feeding. The belt feeding system ensures no surface damage to the wire insulation. The JH-35 is widely used in military, medical, communications, power cable, sheathed wire, and flexible/rigid wire processing applications.
With a processing range of BVR 1.5mm² to 35mm², cutting length from 0 to 100 meters, and stripping lengths up to 250mm on the front end and 120mm on the rear end, the JH-35 handles a broad spectrum of cable processing requirements.
Fully electric operation – No air source required. Plug and play.
8-wheel drive system – Powerful feeding with dual-side pressure rollers for consistent accuracy
Automatic pressure adjustment – Inlet and outlet wheel pressure programmable via touchscreen – no manual adjustment needed
Automatic wheel lifting – Outlet wheels automatically lift during strip to extend stripping length range
Long stripping capacity – Front strip 0-250mm, rear strip 0-120mm (with optional scoring fixture for longer lengths)
Wide wire range – BVR 1.5-35mm², coaxial cable, sheathed wire, and more
3-layer stripping program – Supports up to 3-stage stripping for complex cable constructions
200 program memory – Store parameters for different wire types for quick changeover
7-inch color touchscreen – Intuitive interface with PLC control
Belt feeding system – No surface damage to wire insulation
High precision – Cutting tolerance ±(0.002mm × L)
| Parameter | Specification |
|---|---|
| Model | JH-35 |
| Display | 7-inch Color Touchscreen PLC |
| Memory | Up to 200 programs |
| Applicable Wire Types | Multi-strand copper wire, coaxial cable, sheathed wire, etc. |
| Drive Method | 8-Wheel Drive, Synchronous Belt Dual-Pressure Feeding |
| Wire Core Range | BVR 1.5 – 35mm² |
| Blade Material | Imported High-Speed Steel |
| Conduit Inner Hole Sizes | φ5mm, φ8mm, φ12mm, φ16mm (one each) |
| Power Supply | 220V / 50Hz |
| Power Rating | 650W |
| Cutting Length Range | 0 – 100 meters |
| Front Stripping Length | 0 – 250mm (Longer with optional scoring fixture) |
| Rear Stripping Length | 0 – 120mm |
| Minimum Insulation Length | 50mm |
| Cutting Tolerance | ±(0.002mm × L) (L = Cutting Length) |
| Stripping Speed | 800 – 1,500 pcs/hour (depending on wire length) |
| Dimensions (L×W×H) | 560 × 520 × 450 mm |
| Weight | Approx. 85 kg |
| Air Source | Not required (fully electric) |
1. Fully Electric – No Air Source Required
The JH-35 operates entirely on electric power. No compressor, no air lines, no pneumatic maintenance. This makes the machine ideal for:
Workshops without compressed air infrastructure
Remote production sites
Clean room environments (no oil mist from pneumatic systems)
Facilities seeking to reduce energy costs
2. 8-Wheel Drive System
The powerful 8-wheel drive system with dual-side pressure rollers ensures:
Consistent wire feeding regardless of wire size
High precision cutting and stripping
No slippage even with smooth insulation materials
Stable performance across long production runs
3. Automatic Pressure Adjustment
Inlet and outlet wheel pressure is programmed directly through the touchscreen – no manual wrench adjustments needed. This feature:
Reduces setup time
Eliminates operator guesswork
Ensures consistent pressure across production batches
Prevents damage from over-tightening
4. Automatic Wheel Lifting for Long Strips
The outlet wheels automatically lift during the stripping process to provide clearance for long strip lengths. This feature:
Extends front stripping capacity to 250mm (standard)
Prevents interference between the outlet wheels and the stripped wire
Can be extended further with optional scoring fixtures
5. 3-Layer Stripping Program
The JH-35 supports up to 3-stage stripping in a single program. This is essential for:
Coaxial cable preparation (outer jacket + braid + inner insulation)
Multi-layer shielded cables
Applications requiring partial strip + full strip + extended strip
6. 200 Program Memory
Store up to 200 different wire processing programs. Operators can:
Save parameters for different wire types, sizes, and strip configurations
Recall programs by number for instant changeover
Eliminate manual re-setting between production runs
7. 7-Inch Color Touchscreen
The intuitive touchscreen interface displays all parameters clearly. Operators can:
Set cutting length, strip lengths, and pressure values
Monitor production status in real-time
Access stored programs with a few taps
Minimal training required for operation
8. Belt Feeding System
Unlike roller feeders that can leave marks on soft insulation, the belt feeding system applies even pressure without surface damage. This is critical for:
Visible cable applications where appearance matters
Soft insulation materials (PVC, silicone, TPE)
High-quality cable assemblies
9. Wide Conduit Selection
Four conduit sizes (φ5mm, φ8mm, φ12mm, φ16mm) are included, covering a wide range of wire outer diameters from thin signal cables to thick 35mm² power cables.
10. High Precision Cutting
Cutting tolerance of ±(0.002mm × L) ensures accuracy even at longer cut lengths. For a 1,000mm cut, tolerance is ±2mm.
| Industry | Typical Application | Why JH-35 |
|---|---|---|
| Military | Specialized cable assemblies, ruggedized wiring | Precision stripping, 8-wheel drive for consistent feeding |
| Medical | Medical device cables, patient monitor leads | No air source (clean room compatible), belt feeding prevents surface damage |
| Communications | Coaxial cable preparation, antenna cables | 3-layer stripping for coaxial and shielded cables |
| Power Cable | Power distribution cables, switchgear wiring | Processes up to 35mm², 0-100m cutting length |
| Automotive | Battery cables, sensor wiring, heavy-duty harnesses | BVR 1.5-35mm² range covers automotive power and signal |
| Industrial Control | Control panel wiring, PLC connections | Long strip up to 250mm for terminal block insertion |
| Feature | Standard Stripper | JH-35 |
|---|---|---|
| Air source required | Often required | No (fully electric) |
| Drive system | 2-4 wheels | 8 wheels |
| Wheel pressure adjustment | Manual | Programmable via touchscreen |
| Outlet wheel lifting | Manual or fixed | Automatic |
| Max front strip | 50-80mm | 250mm |
| Wire range | Up to 10mm² | Up to 35mm² |
| Program memory | 20-50 programs | 200 programs |
| Stripping layers | 1-2 layers | 3 layers |
| Surface marking | Possible with roller feeders | Belt feeding – no marking |
Q1: Does the JH-35 require compressed air?
A: No. The JH-35 is fully electric – no air source required.
Q2: What wire types can the JH-35 process?
A: Multi-strand copper wire, coaxial cable, sheathed wire, BVR wire, power cables, and more.
Q3: What is the wire range?
A: BVR 1.5mm² to 35mm².
Q4: What is the maximum stripping length?
A: Front strip up to 250mm; rear strip up to 120mm. For front strips longer than 250mm, an optional scoring fixture is available.
Q5: What is the cutting length range?
A: 0 to 100 meters.
Q6: What is the production speed?
A: 800 to 1,500 pieces per hour, depending on wire length and material.
Q7: How many programs can be stored?
A: Up to 200 programs.
Q8: Does the machine support multi-layer stripping?
A: Yes. The JH-35 supports up to 3-layer stripping in a single program.
Q9: How are the feed wheel pressures adjusted?
A: Pressures are set directly through the touchscreen interface – no manual adjustment needed.
Q10: What conduit sizes are included?
A: φ5mm, φ8mm, φ12mm, and φ16mm.
Q11: Does the feeding system damage wire surfaces?
A: No. The belt feeding system applies even pressure without marking or scratching the insulation.
Q12: What is the warranty?
A: 12-month warranty on the complete machine (consumables including blades and conduits excluded), with lifetime technical support.
If you are interested in the product, contact 2bvideo.com for more information for more information
The information of 2bvideo.com limited shown above is provided by the user or collected on the network. Video 2B does not guarantee the authenticity,accuracy and legitimacy of 2bvideo.com limited information. Video 2B does not involve legal relationships and disputes between users arising from transactions other than secured transactions on this website. Disputes shall be settled by you through negotiation. If you are the person in charge or relevant employee of this enterprise, if you find that the enterprise information is incorrect or want to manage thiscompany, please contact us jacklee1558@gmail.com, after you claim the enterprise, you can obtain management permission, publish supplyand demand information, bring consulting orders, and remove page advertisements.
Main Product:
Automatic Housing Insertion Machine,
Automatic Terminal Crimping Machine,
Wire Crimping Machine ,
Wire Cutting Stripping Machine,
Seal Insertion Machine,
Stripping Machine
