Product
Product
Supplier
Search
Get Quote
730 people are quoting
FLGR-07 uses a detachable pear cluster rather than a fixed ring head. In ring mode, the green pear must align with the finger and shoulder accents. As a pendant, it must hang point-down without leaning or turning forward.
The ring mount, connection point, bail centerline and head weight should therefore be reviewed together. A secure connection is not sufficient if the pear sits off-axis in either mode.
Ring reference: pear point follows the ring centerline and remains level above the split shoulders
Pendant reference: pear point hangs vertically below the bail with the face directed outward
Approval evidence: front, side and movement views for both configurations
IGI report LG696543902 identifies a 1.04 ct Pear Modified Brilliant lab-grown diamond measuring 7.96 x 5.43 x 3.36 mm. Its approximate 1.47 ratio gives it a relatively full pear outline.
The center is graded Fancy Vivid Green and VVS2, with Very Good polish, Very Good symmetry and no fluorescence. The report records HPHT growth and indications of post-growth treatment.
These facts apply only to the inscribed center. They do not grade the approximately 1.05 ct of accents, verify the 18K gold mounting or certify the connection. Another pear still needs a fit review because its width, depth and point position affect the halo and prongs.
Because a pear is directional, the receiving mount should return the head to the same centerline after reassembly. Mark the pear point, bail direction, connection depth and shoulder gaps in the CAD.
The exact lock is not visible in the supplied photographs. Confirm it in the technical drawing before polishing and stone setting.
Once detached, the cluster has its own balance. Bail opening, attachment height and back profile determine whether the face stays visible or tips toward the chest.
Specify chain width and whether a chain is included. A thicker chain may need a larger opening, while a fine chain may allow more rotation.
The detachable head can be developed through the dual-wear jewelry CAD process. The ring position and pendant hang should be shown on separate approval views rather than represented by one front render.
The approximately 1.05 ct accent total serves several areas. The halo controls the removable head outline; larger shoulder accents and shank melee belong only to ring mode. They should be ordered as separate groups.
Alternative green pear centers can be reviewed in the green lab diamond inventory. A change in center dimensions should trigger a new halo opening and orientation review, even when the target weight remains close to one carat.
Product format: detachable ring mount and pendant-ready halo head
Center: 1.04 ct Fancy Vivid Green VVS2 pear lab-grown diamond, 7.96 x 5.43 x 3.36 mm
Report: IGI LG696543902; HPHT; indications of post-growth treatment
Finish: Very Good polish, Very Good symmetry and no fluorescence
Accent diamonds: approximately 1.05 ct total across the halo and ring mount
Approximate total diamond weight: 2.09 ct
Metal: 18K white gold
Sample weight and size: approximately 5.42 g; workshop size 14
Order support: MOQ 1 piece; initial CAD normally within 48 hours; production normally 7-12 working days after approval
Still images cannot show movement. Pre-shipment records should include a ring movement clip, a connection check, a pendant hang clip and close views of the contact surfaces after repeated assembly.
Retain the report number, halo dimensions, ring axis, bail opening, connection depth, ring size, weight and approved clips for repeat orders.
The approved mount should control unwanted rotation, but the exact locating and locking method must be confirmed in CAD and tested on the sample. Front and movement checks should be included in final QC.
The images confirm a pendant-ready bail and show a wearing reference. Chain inclusion, length, width, clasp and metal weight should be listed separately in the quotation.
Only after its actual length, width, depth, girdle and point position are compared with the approved center. Similar carat weight does not guarantee the same halo gap or prong placement.
Send two orientation references with the inquiry. In the FLGR-07 development brief, include one image showing the preferred ring direction and one showing the intended pendant hang. Add the chain width, ring-size range and target quantity. The first CAD review can then return separate axis, bail and connection views instead of one generic product render.
If you are interested in the product, contact 2bvideo.com for more information for more information
The information of 2bvideo.com limited shown above is provided by the user or collected on the network. Video 2B does not guarantee the authenticity,accuracy and legitimacy of 2bvideo.com limited information. Video 2B does not involve legal relationships and disputes between users arising from transactions other than secured transactions on this website. Disputes shall be settled by you through negotiation. If you are the person in charge or relevant employee of this enterprise, if you find that the enterprise information is incorrect or want to manage thiscompany, please contact us jacklee1558@gmail.com, after you claim the enterprise, you can obtain management permission, publish supplyand demand information, bring consulting orders, and remove page advertisements.
Main Product:
lab grown diamond rings,
lab diamond jewelry ,
lab diamond tennis bracelet,
lab diamond cuban link chain,
lab grown diamond,
lab grown diamond engagement rings
