1.Product Description
Huizhou Antenk Electronics Co Ltd manufactures three point nine six millimeter pitch pre assembled wire harness for reliable wire to board power and signal transmission for diverse electronic hardware. This AH3961 series five position wiring assembly adopts UL1007 eighteen AWG multi color insulated wire with black orange grey wire selections and AH3961 plastic housing together with crimped terminals, standard harness length reaches one hundred eighty millimeter with allowed length tolerance, one circuit position is reserved empty according to wiring diagram, complete dimension tables and wiring layout reference can be obtained from official engineering drawing for project validation. Users insert crimped terminals fully into plastic housing, match harness connector with corresponding mating header and arrange wire routing properly to realize stable electrical interconnection. Operators shall follow drawing wiring sequence standards during project design, avoid sharp object scratch on wire insulation and store goods in dry clean environment to prevent crimp terminal oxidation. Unlike competitors purchasing finished harness externally Antenk implements full in house workflow covering mold development terminal stamping wire crimping harness assembly and comprehensive lab performance testing. Our factory holds ISO9001 ISO14001 IATF16949 and UL certifications and over seventy percent finished goods export globally. This wire harness fits industrial control modules consumer electronic hardware household appliances and precision instrument products. Please share your pole count wire color layout length requirement and project specifications for free sample evaluation and full technical drawing support.
UL Certified Cable Harness meets international safety standards for stable power and signal transmission in electronic equipment.
Color Coded Wiring Assembly helps technicians quickly identify different signal circuits and reduce wiring mistakes during installation.
Crimped Contact Harness delivers solid mechanical connection and low contact resistance for long term electronic device operation.
2.Detailed Specifications of AH3961 3.96mm 5P Wire Harness
1. Mechanical Specifications
1.1 Product type: Pre assembled wire harness with plastic connector housing
1.2 Measurement unit: millimeter
1.3 Key dimension: Refer to official engineering drawing for full outline dimension and wiring layout reference. Connector pitch is 3.96 millimeter. Standard harness length is 180 millimeter with tolerance plus minus 10 millimeter. It is five position harness and the fourth position remains empty as wiring diagram defined.
1.4 Assembly method: Fully insert crimped terminals into plastic housing, plug the harness connector onto matching mating header and arrange wire path properly to complete electrical connection.
1.5 Ordering feature: Customers can customize pole assignment wire color and harness length to satisfy different hardware project demands.
1.6 CTA: Contact our engineering team to obtain complete dimension drawings and wiring specifications for your project validation.
2. Material Construction
2.1 Connector Housing: AH3961 plastic housing
2.2 Wire: UL1007 18 AWG insulated wire, available in black orange and grey
2.3 Terminal: AT3961T crimp terminal
3. Environmental Compliance Parameters
3.1 Environmental compliance: Compliant with RoHS and HSF requirements
4. Usage Method
4.1 Assembly mode: Ensure crimp terminals are fully locked inside plastic housing, mate complete harness assembly with corresponding mating header, arrange wire routing reasonably to build stable power and signal interconnection.
4.2 Operation tip: Strictly follow wiring sequence shown on official engineering drawing for project design.
5. Application Scenarios
5.1 Internal wiring for industrial control modules
5.2 Signal connection for consumer electronic devices
5.3 Circuit wiring for household electrical appliance products
5.4 Interconnection for precision instrument equipment
6. Operation & Storage Precautions
6.1 Follow official wiring sequence and dimension tolerances during project design
6.2 Avoid sharp object scratches to prevent damage to wire insulation layer
6.3 Do not apply excessive pulling force on wires to prevent terminal loosening or detachment
6.4 Prevent scratches dirt and mechanical impact on housing and crimp terminals before assembly
6.5 Store products in dry clean environment to avoid oxidation of crimp metal terminals
6.6 Confirm pole assignment wire color and harness length before placing purchase orders
6.7 CTA: Submit your hardware requirement wiring layout harness length and project information, we provide free sample evaluation and professional technical consultation services.
3.FAQ
Q: How many packaging do you have?
A: We have five packages including PE bag, hand bag, zip lock bag, colorful box and white box currently.
Q: Can you do our own packaging?
A: Yes, you just provide the package design and we will produce what you want. We also have the professional designer can help you do the packaging design.
Q: How many different types of products your company manufactures?
A: Now we have more than 1,000 products. We have a strong advantage of OEM, just give us the actual products or your idea that you want, we will manufacture for you.
4.Product Drawing