1.Product Description
Huizhou Antenk Electronics Co Ltd manufactures two point five zero millimeter pitch pre assembled cable harness for stable wire to board power and signal interconnection for various electronic hardware. This AH2508 series four position wiring assembly adopts UL1007 twenty four AWG white insulated wire, AT2508T crimp terminals and AH2508 plastic housings at both ends, standard harness length reaches eighty millimeter with allowed length tolerance, complete dimension tables and assembly reference can be obtained from official engineering drawing for project validation. Users lock crimp terminals fully inside plastic housings and mate both side connectors with corresponding matching headers and arrange wire routing reasonably to achieve reliable electrical connection. Operators shall follow drawing dimension standards during project design, avoid sharp object scratches to wire insulation and store goods in dry clean environment to prevent crimp metal terminals oxidation. Unlike competitors purchasing finished harness externally Antenk implements full in house workflow covering mold development terminal stamping wire crimping harness assembly and comprehensive lab performance testing. Our factory holds ISO9001 ISO14001 IATF16949 and UL certifications and over seventy percent finished goods export globally. This wire harness fits industrial control modules consumer electronic hardware household appliances and precision instrument products. Please share your housing type wire specification length requirement and project specifications for free sample evaluation and full technical drawing support.
White Insulated Harness delivers clean visual identification and reliable insulation performance for internal electronic device wiring projects.
Dual Housing Cable Set enables convenient bidirectional plug in connection for fast signal and power transmission between electronic components.
Pre Crimped Wire Assembly ensures consistent crimp quality and reduces on site processing work during product assembly procedures.
2.Detailed Specifications of ATK‑AH2508‑4P‑80 Wire Harness
1. Mechanical Specifications
1.1 Product type: Pre assembled double ended wire harness with plastic connector housings
1.2 Measurement unit: millimeter
1.3 Key dimension: Refer to official engineering drawing for full outline dimension and assembly reference. Connector pitch is 2.50 millimeter. Standard harness length is 80 millimeter with tolerance plus minus 5 millimeter. It is four position harness equipped with two AH2508 plastic housings on both ends.
1.4 Assembly method: Fully lock crimped terminals into plastic housings, plug two end connectors onto corresponding mating headers and arrange wire path properly to finish electrical interconnection.
1.5 Ordering feature: Customers can customize wire specification harness length and housing configuration to satisfy diverse hardware project demands.
1.6 CTA: Contact our engineering team to obtain complete dimension drawings and assembly specifications for your project validation.
2. Material Construction
2.1 Connector Housing: AH2508 2.50mm 4P plastic housing, two pieces included
2.2 Wire: UL1007 24 AWG white insulated wire
2.3 Terminal: AT2508T crimp terminal
3. Environmental Compliance Parameters
3.1 Environmental compliance: Compliant with RoHS and HSF requirements
4. Usage Method
4.1 Assembly mode: Ensure crimp terminals are completely locked inside both side plastic housings, mate double end connectors with matched counterpart headers, arrange wire routing reasonably to establish stable power and signal interconnection.
4.2 Operation tip: Adopt dimension tolerance values shown on official engineering drawing for project design.
5. Application Scenarios
5.1 Internal wiring for industrial control modules
5.2 Signal interconnection for consumer electronic devices
5.3 Circuit connection for household electrical appliance products
5.4 Wiring assembly for precision instrument equipment
6. Operation & Storage Precautions
6.1 Follow official dimension tolerances during project design and assembly
6.2 Avoid sharp object scratches to prevent damage to wire insulation layer
6.3 Do not apply excessive pulling force on wires to prevent terminal loosening or disengagement
6.4 Prevent scratches dirt and mechanical impact on plastic housings and crimp terminals before installation
6.5 Store products in dry clean environment to avoid oxidation of metal crimp terminals
6.6 Confirm harness length wire type and housing configuration before placing purchase orders
6.7 CTA: Submit your hardware requirement harness length wire parameters and project information, we provide free sample evaluation and professional technical consultation services.
3.FAQ
Q: How many packaging do you have?
A: We have five packages including PE bag, hand bag, zip lock bag, colorful box and white box currently.
Q: Can you do our own packaging?
A: Yes, you just provide the package design and we will produce what you want. We also have the professional designer can help you do the packaging design.
Q: How many different types of products your company manufactures?
A: Now we have more than 1,000 products. We have a strong advantage of OEM, just give us the actual products or your idea that you want, we will manufacture for you.
4.Product Drawing