Manual Hydraulic Pipe Bender for Precise Metal Conduit Bending

2 week ago

1 0

NINGBO MARSHINE POWER TECHNOLOGY CO., LTD.

 10 year year

Product details

Manual Hydraulic Pipe Bender

The MARSHINE Manual Hydraulic Pipe Bender is used for site forming, with a stable 10 ton bending force, and it is made for tube diameter between 13 mm and 34 mm. The hydraulic tube bending tool feature four 24 inch rolling casters to enable moving in the whole unit all around in workshops or work sites without having to use any lifting gear. Six standard dies 13, 16, 19, 22, 28 and 34mm will be included for the most widespread pipe sizes in plumbing and power-conduit work. It has a working stroke of 160mm which is just what you need for a tube wall thickness between 2mm an 3.5mm. During use, the dies are secured in place in your bending frame to keep from providing play, and the oil seal set included protect internal hydraulic pressure for use over more than one thousand hours. In fact the hand lever was single-handed, so made easy users to curve open and closing smooth without creasing or eclipsing pipe surface.

The portable pipe bending machine has a weight of about 21 kg, achieving a balance between heavy structural rigidity and portability.

It has a tough yellow steel frame that do not deform with constantly present pressure, and the integrated hydraulic cylinder constant power among every cycle of pipe bending.

The MARSHINE Hand Operated Pipe Bender eliminates the need for external power, which make it ideal for remote construction sites, maintenance, and small fabrication workshops where power is scarce.

Logistics the entire set gurneyed inside a wooden crate of big size 490*240*140 mm forming the external dimensions.

Rapid transition between different dies allows very quick swapping from one pipe diameter to another, thus reducing the setup time between batches of work done by bending.

The hydraulic steel tube bender is among the most widespread conduit, pipe, and tube bender tools of the past decade in the construction and building industry.

It is compatible with standard installation requirements for heavy steel conduit, acid-resistant piping, thin-wall metal tubing, etc.

Total users rely on this MARSHINE Manual Metal Tube Bender due to its design and tested strong build, making it the go-to exact solution where technicians of every ability set operate the machine.

There are no lengthy calibrations to the pointed before use, just an everyday check on the fluid seal and a top-up of hydraulic fluid when necessary is all that is needed for routine upkeep.

Compared to big powered laying machines, this is a cost-benefit physical alternative for small to medium-sized jobs creating access for contractors to execute pipe routing safely and efficiently.

A wheeled base keeps the unit stable while it is being pressed, and the angled lever design reduces user fatigue during repetitive bending tasks.

Parameter

Model	SWG-1
Size	1 inch
Bending Range	Φ13-34 mm
Mobile Wheel	Included
Output Force	10 Ton
Working Stroke	160 mm
Applicable Pipe Wall Thickness	2-3.5 mm
Standard Dies (6 pcs)	13 mm, 16 mm, 19 mm, 22 mm, 28 mm, 34 mm
Weight	Approx. 21 kg
Wooden Packing Dimension	490240140 mm
Bonus Accessories	Hex wrench, oil seal

Contact Now

If you are interested in the product, contact 2bvideo.com for more information for more information

To:: NINGBO MARSHINE POWER TECHNOLOGY CO., LTD.

Message:

Submit

Disclaimer：

The information of 2bvideo.com limited shown above is provided by the user or collected on the network. Video 2B does not guarantee the authenticity,accuracy and legitimacy of 2bvideo.com limited information. Video 2B does not involve legal relationships and disputes between users arising from transactions other than secured transactions on this website. Disputes shall be settled by you through negotiation. If you are the person in charge or relevant employee of this enterprise, if you find that the enterprise information is incorrect or want to manage thiscompany, please contact us jacklee1558@gmail.com, after you claim the enterprise, you can obtain management permission, publish supplyand demand information, bring consulting orders, and remove page advertisements.

NINGBO MARSHINE POWER TECHNOLOGY CO., LTD.

 Audited supplier

10 year

Address: Ningbo, China

Main Product: Hydraulic Puller, Hydraulic Tensioner , Stringing Block, Hoist Block, Hydraulic Press Tools, Tightening Tools

 Contact now

Disclaimer：