PV2R13-23-116-L-RAAA-4326 Hydraulic Vane pump
Product Description
PV2R13-23-116-L-RAAA-4326 is a high-performance double Hydraulic Vane pump, a core power source of the hydraulic system. This hydraulic pump integrates two independent vane pump units in one housing with a shared drive shaft, supplying stable hydraulic flow to two separate hydraulic circuits simultaneously. It can provide continuous power for different actuators on the Machine, widely matched with hydraulic winch, lifting and walking mechanisms. Adopting precision vane and rotor structure, it features low noise, stable flow output and small pressure fluctuation, suitable for long continuous operation in construction machinery, industrial equipment and other heavy-load working scenarios.
Main Features
1. Double pump combined design, two independent oil outlets for separate hydraulic circuits, high energy efficiency
2. Low noise structure, stable delivery flow, little pressure pulsation for the hydraulic system
3. High-precision pump core, low internal leakage, excellent volumetric efficiency
4. Foot mounting type (L), clockwise rotation, standard port arrangement RAAA
5. Easy replacement of pump cartridge, convenient maintenance and on-site service
6. Wide compatibility, can be installed on various types of Machine and cooperate with hydraulic winch
Technical Parameters
- Model: PV2R13-23-116-L-RAAA-4326
- Type: Double Hydraulic Vane pump
- Displacement: Front pump 23 cm³/rev, Rear pump 116 cm³/rev
- Max working pressure: 21 MPa
- Rated speed: 600–1800 r/min
- Working medium: Anti-wear hydraulic oil
- Oil viscosity range: 15–100 mm²/s
- Working temperature: -20℃ ~ +80℃
- Installation form: Foot mounting (L)
- Rotation direction: Clockwise (R)
- Application: Construction machinery, industrial Machine, equipment equipped with hydraulic winch
PV2R13-23-116-L-RAAA-4326 — Dual-Circuit Power Core for Demanding Hydraulic Systems
When a single flow path is not enough to carry the full duty cycle of a production Machine, the pump at the center of the circuit has to do more than move oil—it has to split, prioritize, and protect two independent pressure regimes without compromise. The PV2R13-23-116-L-RAAA-4326 is built precisely for that role: a fixed-displacement, double Hydraulic Vane pump that packages two Yuken PV2R-series single pumps in tandem within one housing, driven by a common shaft and sharing a single suction port while delivering two separate discharge flows.
Reading the model code. The designation decodes the pump’s architecture without ambiguity: PV2R13 identifies the tandem double-pump family (PV2R1 small pump + PV2R3 large pump); 23 is the nominal displacement of the small section; 116 is the nominal displacement of the large section; L specifies foot-mounting; R sets clockwise rotation as viewed from the shaft end; RAAA defines the standard port positions (small-pump discharge, large-pump discharge, and suction all in the “upward” configuration); and 4326 is the design number. The result is a hydraulic pump configured for drop-in integration into foot-mounted power units where two circuits must be fed from one prime mover.
Technical envelope.
Parameter Specification
Small-section displacement (PV2R1) 23 cm³/rev nominal (≈22.1 cm³/rev actual)
Large-section displacement (PV2R3) 116 cm³/rev nominal (≈115.6 cm³/rev actual)
Rated pressure (continuous) 17.5 MPa
Peak pressure (short-term) 21 MPa
Speed range 600–1,800 rpm
Mounting Foot mount (L)
Rotation Clockwise (R), shaft-end view
Approx. weight ≈50.8–55.6 kg (foot-mount configuration)
Sources: displacement and pressure ratings for the PV2R13-23-116 combination; speed and pressure envelope for the PV2R13 family; mounting and weight data for L-type PV2R13 units.
Where the design earns its place in the hydraulic system. The PV2R13-23-116 is not simply two pumps bolted together—it is a flow-management architecture. During rapid-traverse or high-speed approach phases, both sections can deliver flow to the same circuit for maximum actuator speed; during pressing, clamping, or holding phases, the large 116 cm³/rev section can unload while the 23 cm³/rev section maintains pressure on the control circuit. Each discharge port feeds a separate circuit with its own relief valve setting, so the small section can hold a stable pilot or clamping pressure while the large section cycles independently. This split-circuit capability is what makes the Hydraulic Vane pump a natural fit for injection molding machines, die-casting support equipment, heavy-duty hydraulic presses, and large hydraulic power stations where fast movement and sustained pressure rarely peak at the same moment.
Low-noise operation and serviceability. The PV2R13 series uses a Yuken-developed low-noise stator curve to keep pressure pulsation and airborne noise under control—an advantage in indoor factory environments where hydraulic system noise contributes directly to the overall Machine sound profile. The two pumping cartridges are modular and independently replaceable: if one section wears or is damaged, the corresponding cartridge kit can be swapped without scrapping the entire pump body, reducing downtime and spare-parts cost.
Specify with confidence. For continuous-duty operation, keep working pressure at or below 17.5 MPa and reserve the 21 MPa ceiling for short-term peaks. Because the two sections share one suction port sized for the 116 cm³/rev section, suction lines should be generously sized and kept short to avoid cavitation. With its 23/116 displacement split, foot-mount stability, and dual independent outlets, the PV2R13-23-116-L-RAAA-4326 delivers a compact, serviceable hydraulic pump solution for machines that demand two pressure worlds from one shaft.