Get Quote
730 people are quoting
X

White Gabled Roof Cabin Orbit Walkaround

2 week ago
1 0
Product details
5800 mm Qick Fold Container House Shelter | Pop-Up Retail Cabin That Expands On Site for Malls, Markets and Seasonal Venues
Product Overview
Venues do not wait for shops. A mall atrium grants a 48-hour fit-out window between contracts; a weekend market expects the stall trading at six in the morning. This qick fold container house shelter is dimensioned around that reality: it travels at 340 mm deep, opens into a 5610 × 2320 × 2350 mm trading room without a crane or a contractor, and when the season closes it joins a flatbed with the other folded stalls of your circuit. As a customized folding container shop expandable on site, the retail floor is created at the venue, not paid for in freight.
Specifications
 
 
Group Item Specification
Dimensions External 5800 × 2450 × 2500 mm
  Internal 5610 × 2320 × 2350 mm
  Folded (transit) 5800 × 2450 × 340 mm
  Total weight 850 kg
Design Structural service life 10 years
  Floor live load 200 kg/m²
  Roof live load 100 kg/㎡
  Wind load Grade 8
  Seismic resistance Grade 10
Top frame Q235B rectangular tubes 40×40×2.32 m (t=1.2) ×4; 20×40×1.09 m (t=1.2) ×5; 20×20×5.615 m (t=1.2) ×2 Special-shaped tube 60×80×5.775 m (t=1.4) ×2
  Outer roof panel t=0.3 mm, 5+1 pcs Glass wool 12 m × 1.5 m (t=0.5) ×1; ceiling panel t=0.23 ×3
5.8 m side U-channel 1.08 m (t=0.6) ×8; L-section steel plate 1.13 m (t=2.0) ×4 and 1.15 m (t=2.0) ×4 P-tube 40×60×5.77 m (t=1.2) ×8 and 1.08 m (t=1.2) ×8
  High-strength hinges ×30; wall panel 1080×2.85 m (t=50) ×8 Galvanized angle 1.08 m (t=0.5) ×16 and 2.85 m (t=0.5) ×8; 9×6D seal strip 5.77 m ×12
2.45 m end Q235B rectangular tubes 2.31 m ×4 and 2.3 m ×4 (t=1.2); U-channel 2.3 m (t=0.8) ×1 and 0.975 m (t=0.8) ×1 Wall panel 950 mm ×7; galvanized angle 25# (t=0.16) 15.5 m
  Windows ×2; ceiling trim panels ×8; door ×1; 10×12D seal strip 19 m  
Bottom frame Q235B rectangular tubes 60×140×5.78 m ×2, 40×40×2.32 m ×7, 60×80×2.32 m ×2, 40×40×0.667 m ×8 (t=1.2) High-strength hinges ×4; floor board 2805×1158 mm (t=15 mm) ×4; 30# angle steel ×1
Finish Frame coating Electrostatic spray, white plastic powder
  Outer roof panel 0.3 mm colour steel sheet
  Interior panels Colour single face V/830/0.23 mm
Wall 5.8 m side 50 mm composite panel 0.25 mm + glass wool (50 kg/m³) + 0.25 mm
  2.45 m end 65 mm composite panel 0.25 mm + glass wool (50 kg/m³) + 0.25 mm
Floor Fireproof tile flooring 15 mm
Electrical Wiring CE-compliant appliances, moisture-proof installation per circuit code; 4 mm² national-standard copper inlet, 1 leakage protector, 2.5 mm² socket circuits, 3 European-standard sockets
Door Security door Warm-white steel security door, 970 × 1970 mm
Window Glazing 920 × 920 mm single-glazed sliding steel window, guard bars and insect screen
Key Features & Benefits
The venue clock sets the design. Two people with a socket wrench and a drill bring this foldable container home from transit profile to trading room in a half-day: walls swing up on 34 high-strength hinges, the roof follows the guide geometry, and the floor boards seat onto the bottom frame. No crane booking, no wet trade, no permit for foundations — which is exactly the list a mall landlord's 48-hour window eliminates, and the list a market organiser never wants to read.
Built to pass through the building, not just into it. A shopping centre delivers most things through freight lifts and basement ramps, and the folded envelope is sized for that path rather than arguing with it. Specified as a folding container retail kiosk for shopping mall, the unit moves in as a 340 mm slab on a pallet jack route, is unfolded inside the atrium lease line, and leaves the same way when the contract ends — no wall demolition, no make-good beyond sweeping.
Expansion is the floor-area trick. What travels flat is what the venue charges rent for: the trading depth appears only when the side panels swing out on site. Ordered as a customized folding container shop expandable on site, the expanded face can carry the display windows (two 920 × 920 mm sliding steel units with guard bars as standard), an optional counter hatch, and shelving walls fixed to the 50 mm composite panels. Retail square meters are earned at set-up, not paid in transit.
Clusters share one spine, not eight cables. A market row works when the services are planned across units: one feed point, a distribution board in the first cabin, and surface-run circuits passed along the row through the end-wall openings. Our customized container shop cluster for park market planning sets socket counts, cable routes and stall spacing per your market layout, so the Saturday switch-on is one person at one board instead of eight separate utility requests to the venue.
The wear list is short and stocked. Everything that cycles is a named part: 34 hinges, the 9×6D and 10×12D seal strips along the fold lines, and the powder coat at the swing edges. As a folding prefab house structure this is deliberate — a season of weekly markets is hundreds of fold cycles on the same guide channels, and operators who stock strips and bolts run years on one shell instead of retiring it early.
It parks in the building's own footprint rules. The 2450 mm folded width clears standard loading-bay lanes; the 850 kg mass sits inside what an atrium floor and a market hardstanding already carry without a structural review. Where a fixed shop needs a landlord's alteration agreement, this collapsible container house is booked as equipment — the paperwork class is the commercial advantage.
Off-circuit, it rides with the circuit. Between venues the folded unit lies flat on the same trailer that carries the rest of the market stall kit, and the next town's pitch gets the identical set-up half-day. For operators running a rotation — market Saturday, fairground weekend, festival week — the asset earns on three calendars while a fixed shop earns on one.
Application Scenarios
  • Mall atrium pop-ups — brand launches and seasonal concessions as a folding container cabin inside the lease line, installed overnight between mall close and opening.
  • Weekend and park markets — a customized container shop cluster for park market of four to eight units sharing one feed, one layout grid and one closing routine.
  • Transport interchanges and forecourts — ticket, information and coffee points where the easy install container cabin half-day set-up means the service starts the day the delivery does.
  • Sports grounds and event calendars — merchandising boxes that unfold in the car park before gates open and fold into the equipment trailer after the final whistle.
  • University and hospital campuses — seasonal shops, welcome-week retail and visitor conveniences placed without touching permanent buildings or their fire strategies.
  • Coastal promenades and piers — the galvanised frame and sealed floor handle sand, spray and daily strike-down, and the unit leaves the frontage when winter ends.
  • Exhibition halls and trade shows — a foldable container house booth that ships flat with the stand kit and rebuilds in a hall in the same half-day, show after show.
OEM & Wholesale Service
We supply operators running several units across a venue calendar, and the order is planned as a system rather than a product. Send the circuit — venues, dates, pitch dimensions — and we return a cluster layout with stall spacing, a single-line distribution plan, and matching set-up checklists so any two staff can open any unit. Order-stage variables: expanded-face configuration (window count, counter hatch, shelving wall), interior panel colour and finish, socket count and circuit split per market layout, lock packages for unmanned pitches, signage rails on the long face, and anchoring for exposed promenades. Chain buyers standardising on one flat panel foldable container home specification across cities receive a parts matrix — strips, hinges, bolts, panels — priced with the first fleet order so year-two maintenance does not start a new procurement. As a folding container house price reference point, fleet quotes are issued per unit at the container count you can actually load, not per single-sample price.

FAQ

  • Q: Who sets the unit up, and what does the site need to provide?
    A: Two people with basic hand tools complete the unfold and seat-down in a half-day; the sequence is numbered and ships with the unit. The site provides level hardstanding, the agreed feed point if the row is wired from a shared board, and clearance along the swing arcs of the panels — roughly the folded depth plus the trading depth. Nothing else: no foundation, no crane, no trades.
  • Q: What does a shopping centre's leasing and fire team usually ask for, and what do we supply?
    A: They ask for dimensions through the loading route, floor load, fire behaviour of linings, and electrical certification. The unit answers with the 340 mm folded envelope, 850 kg mass, 15 mm fireproof tile floor, the composite panel build-up, and CE-marked appliances on moisture-proof wiring with a leakage protector. We supply the datasheet set in the language your landlord's consultant works in, before you sign the fit-out window.
  • Q: How should a market cluster be laid out for power and for queues?
    A: One feed, one board, one direction. Put the distribution cabin at the supply pillar end, run circuits along the row, and face the trading openings away from the service lane so queues and cable routes never cross. We draw this against your market map — stall spacing, swing clearance and the closing order — rather than leaving it to the first Saturday to discover.
  • Q: What changes when the shop is specified to expand on site?
    A: The transport profile stays the same; the trading geometry is chosen per venue. A deeper pitch can take the full swing-out with counter hatch and shelving wall; a tight atrium corner can keep one side folded as a wall face and trade through the other. The panel system is the same structure — expansion is a configuration you select at order stage, and we mark the fixed options on your production drawing.
  • Q: What does a season of weekly set-ups actually wear out?
    A: The fold lines. Seal strips along the 9×6D and 10×12D channels compress first, hinge bolts need a torque check each season start, and the powder coat at swing edges touches up. Operators who keep the strip-and-bolt kit on the trailer run the same shells for years; the frame and panels are not the consumables.
Contact Now

If you are interested in the product, contact 2bvideo.com for more information for more information

To:
HEBEI BANGRUN METAL PRODUCTS CO.,LTD
Message:
Submit
Disclaimer:

The information of 2bvideo.com limited shown above is provided by the user or collected on the network. Video 2B does not guarantee the authenticity,accuracy and legitimacy of 2bvideo.com limited information. Video 2B does not involve legal relationships and disputes between users arising from transactions other than secured transactions on this website. Disputes shall be settled by you through negotiation. If you are the person in charge or relevant employee of this enterprise, if you find that the enterprise information is incorrect or want to manage thiscompany, please contact us jacklee1558@gmail.com, after you claim the enterprise, you can obtain management permission, publish supplyand demand information, bring consulting orders, and remove page advertisements.

Audited supplier
3 month
Address: Hengshui, China


Main Product: Expandable Container House , Flat Pack Container House, Folding Container House, Prefabricated House, Modular Cabin House, Portable Guard House

Disclaimer:
The information of 2bvideo.com limited shown above is provided by the user or collected on the network. Video 2B does not guarantee the authenticity,accuracy and legitimacy of 2bvideo.com limited information. Video 2B does not involve legal relationships and disputes between users arising from transactions other than secured transactions on this website. Disputes shall be settled by you through negotiation. If you are the person in charge or relevant employee of this enterprise, if you find that the enterprise information is incorrect or want to manage thiscompany, please contact us jacklee1558@gmail.com, after you claim the enterprise, you can obtain management permission, publish supplyand demand information, bring consulting orders, and remove page advertisements.
Content Us