Need a plastic rod that can handle corrosive chemicals, reduce friction and operate at high temperatures? Virgin White PTFE Rod is a handy material for industrial applications requiring chemical resistance, low friction and electrical insulation.
AHD offers 100% new PTFE rods in diameters from 4 to 260 mm and standard length 1000 mm. We stock regular sizes and aim to dispatch within 48 hours of order confirmation. We also provide cut-to-length and CNC machining for customers who need ready-to-process material or custom components.
AHD’s single source suppliers of PTFE rod material and further processing consist of manufacturers of seals and gaskets, parts for chemical equipment, valve parts, electrical insulation parts, and more.
All New Material White PTFE Rod Specifications
| Property |
AHD All New Material White PTFE Rod |
| Material |
All New Pure PTFE
|
| Diameter range |
4–260 mm |
| Standard length |
1000 mm |
| Density |
2.2 g/cm³ |
| Flammability rating |
UL 94 V-0 |
| Notched impact strength |
11.2 kJ/m² |
| Shore hardness |
Shore D 50-55 |
| Long-term service temperature |
260°C |
| Short-term service temperature |
280°C |
| Processing services |
Cut to length, CNC machining, custom diameter |
The technical data is presented based on the parameters supplied for this product. Actual performance and suitability depend on material grade, test method, specimen preparation and conditions of use. Verify applicable TDS and test conditions before using for engineering approval.
Why Pure PTFE Rod?
PTFE (Polytetrafluoroethylene) is widely used in arduous industrial environments. The virgin PTFE is appreciated for its excellent chemical resistance, low friction, temperature resistance and electrical insulation.
1. Superior chemical resistance
PTFE is unaffected by a very wide spectrum of acids, alkalis and industrial chemicals. This makes it useful for some chemical-processing components, seals, and pump parts.
Problem it helps solve: Plastic parts that are not suitable for the application can swell, degrade, or lose their functional properties when exposed to chemicals. In many chemically demanding environments, choosing PTFE can contribute to reduced material degradation.
Chemical compatibility needs to be checked with the actual chemical, concentration, temperature and exposure conditions.
2. Very low friction force
PTFE is naturally low-friction on the surface, so it works well for some sliding and contact applications. It can reduce the friction between moving parts , and reduce the frequency of lubrication . This can help with some designs .
Excessive friction can lead to increased resistance, heat and maintenance needs in moving assemblies.
3. Performance at High Temperature
The parameters provided for AHD show a long term service temperature of 260°C and short term service temperature of 280°C.
Some commodity plastics cannot be used in high temperature environments while maintaining their necessary performance. PTFE is an alternative for parts exposed to higher service temperatures providing the load and design limitations are met.
4. Insulation of Electric Devices
PTFE is a good electrical insulator and finds use in many electrical and electronic applications.
Electrical components need reliable insulation to help prevent unwanted current flow and encourage equipment safety.
White PTFE Rod Typical Use
White PTFE Rod is frequently utilized in industrial applications where chemical resistance, low friction and dependable electrical insulation are needed.
Seals and Gaskets: To seal components exposed to chemicals, heat or tough operating conditions.
Chemical Equipment: For linings, spacers and parts in tanks, pipes and chemical processing systems.
Valves and Pumps: Machined into valve seats, pump parts and sealing components where low friction and chemical resistance are important.
Electrical Insulation For the insulation of components and parts which need stable electrical properties.
Bearings and wear-resistant parts: Suitable for low friction parts and sliding components of industrial machinery.
PTFE Rod Cut, CNC Machining Suggestions
Cutting and CNC Machining
Virgin PTFE Rod can be cut to length and CNC machined for custom industrial components. PTFE is relatively soft and can be deformed under excessive pressure. Use sharp cutting tools, carefully secure workpieces and avoid excessive clamping force. Dimensional stability is ensured by correct machining conditions.
PTFE vs POM vs UHMWPE: Which Plastic Rod Should You Choose?
PTFE, POM and UHMWPE are all used for industrial parts but there are quite a lot of differences between them in their mechanical and thermal properties. PTFE is especially good for chemical resistance and temperature capability. POM is stiffer. UHMWPE is a common choice for impact and abrasion resistance.
| Property |
All New PTFE |
POM (Acetal) |
UHMWPE |
| Density |
2.2 g/cm³ |
1.41 g/cm³
|
0.94 g/cm³ |
| Tensile strength |
Approx. 27 MPa |
Approx. 70–76 MPa |
Approx. 19–40 MPa |
| Tensile modulus |
Approx. 0.5 GPa |
Approx. 2.9–3.1 GPa |
Approx. 0.75–0.80 GPa |
| Notched impact strength |
11.2 kJ/m² |
Approx. 14–16 kJ/m² |
Often no break in representative ASTM D256 data |
| Hardness |
D 55 |
D 86 |
D 66 |
| Long-term service temperature |
Up to 260°C |
Approx. 90°C |
80°C |
| Friction |
Very low |
Low |
Low |
| Chemical resistance |
Excellent against many chemicals |
More limited, depending on chemical |
Good against many chemicals |
| Main advantage |
Chemical and temperature resistance |
High stiffness and dimensional stability |
Abrasion and impact resistance |
Which Material Suits Your Application Best?
Choose PTFE Rod for chemical resistance, very low friction, electrical insulation or high temperature capability. It is especially useful for selected seals, gaskets, parts of chemical equipment and valve components.”
POM Rod provides greater stiffness, strength and dimensional stability for precision mechanical parts such as gears, rollers and machine components.
Choose UHMWPE Rod where abrasion resistance, impact toughness and low-friction sliding characteristics are important, such as wear strips, liners, guide rails and material-handling equipment.
Why purchase All New PTFE Rod from AHD?
Choosing a good supplier is not only about purchasing efficiency, also affected by stock availability, processing support, documentation and export coordination.
Regular Stock and Quick Dispatch
AHD stocks standard PTFE rod sizes. Stock sizes available and ready to ship within 48 hours of order confirmation. Please confirm required diameter and quantity before ordering.
Supply of virgin raw materials
AHD stocks virgin PTFE rod for industrial customers requiring virgin PTFE for their components and production needs.
Custom Cutting & CNC Machining
We also offer cut to length and CNC machining. Our team is available to discuss custom diameter requirements and component drawings with customers, helping to eliminate the need to coordinate separate material and machining suppliers.
Help with Export and Documentation
AHD has 32 years of manufacturing experience and supports international B2B customers with TDS, factory inspection reports, COO and relevant export documents. Further documentation may be discussed as per project requirements.
All-in-One Sourcing Support
AHD supplies a full range of engineering plastic sheets and rods in addition to PTFE rods. We help simplify procurement for distributors, fabricators and industrial manufacturers by coordinating their material sourcing and processing requirements.
FAQ
1. What is the max service temperature of PTFE Tube?
The AHD parameters supplied define a long term service temperature of 260°C and short term service temperature of 280°C. Actual suitability is determined by mechanical loading, time of exposure and operating conditions.
2. Can Virgin PTFE be used for chemical seals and gaskets?
PTFE has good chemical resistance to many chemicals and is widely used in sealing applications. However, compatibility should be checked for the specific chemical, concentration, temperature and pressure.
3. Is it possible to cut or CNC machine PTFE Rod?
Yes. AHD provides cut-to-length and CNC machining services. We can also provide custom diameters to meet your project specifications.
4. How fast AHD can delivery PTFE Rod?
Regular stocked sizes are shipped within 48 hours after order confirmation. Please check stock availability for required diameter & quantity.
Request a Quote for Virgin White PTFE Rod
AHD provides regular stock sizes, rapid dispatch and custom processing services to distributors, wholesalers, fabricators and manufacturers.
Call AHD today to check stock availability and request a quotation on Virgin White PTFE Rod.
Request a Quote | Check Stock Availability | Contact Our Sales Team