The HAITIAN SWH-G03-C22-D24 solenoid operated directional valve is a high-precision Hydraulic valve used to control the flow direction of hydraulic oil. It acts as a key control part of the hydraulic system, accurately switching the movement direction of actuators and ensuring stable operation of the Machine. Widely matched for Haitian injection molding machines and other industrial hydraulic equipment.
1. This Hydraulic valve adopts reliable solenoid drive, fast response and precise direction switching.
2. Good sealing performance, low internal leakage, which improves the working efficiency of the whole hydraulic system.
3. Stable action under long-time continuous operation, strong anti-interference ability.
4. Standard G03 installation size, easy replacement and maintenance for the Machine.
5. Strict quality inspection before delivery, suitable for original replacement and aftermarket assembly.
HAITIAN SWH-G03-C22-D24 Solenoid Operated Directional Valve — Wet-Armature Core Control for Injection Molding Machine Hydraulic Systems
In the hydraulic system of an injection molding Machine, the directional control valve is the component that decides where oil goes and when. The HAITIAN SWH-G03-C22-D24 is built precisely for that role: a direct-operated, wet-armature hydraulic valve configured as a 3-position, 4-way solenoid directional control, engineered as the original supporting valve for Haitian injection molding machines and dimensionally compatible with the Yuken DSG-03 interface.
Technical Specifications
Parameter SWH-G03-C22-D24 (SWH-G03 series)
Valve type Solenoid operated directional hydraulic valve, direct operated, wet armature
Mounting Subplate mounted, Size 03 (G03 / 10-size nominal diameter)
Flow paths 4-way, 3-position
Spool function (C22) P port closed at neutral; A, B, and T ports interconnected for unloading
Rated flow 80 L/min (21 GPM)
Max working pressure 25 MPa (250 bar / 3,625 psi) — model-specific rating
Series max operating pressure 310 bar (4,500 psi)
Max tank line back pressure 160 bar (2,350 psi)
Coil voltage (D24) DC 24 V (operating range 21.6–26.4 V)
Coil current / power 1.33 A holding, approx. 32 W
Max operating frequency 240 CPM
Recommended filtration 25 micron
Hydraulic fluid Mineral oil, viscosity 10–400 cSt
Fluid temperature range −25 °C to +90 °C (−13 °F to +194 °F)
Manual override (M3) Manual push rod with rubber dust cap for power-failure commissioning
Sources: model-specific ratings from Haitian SWH-G03-C22-D24 documentation; series ratings and coil data from SWH-G03 series specifications.
What the C22 Spool Does in the Machine
The “C22” designation defines the neutral-position circuit—and it is one of the most application-critical details of this hydraulic valve. At center, the pressure port P is blocked, holding pump pressure, while cylinder ports A and B connect to tank port T. That means the actuator side of the hydraulic system is relieved and left floating when the Machine is in neutral standby, reducing the risk of trapped pressure and cylinder drift during mold-clamp and injection sequences.
Wet-Armature Construction and D24 Coil
The solenoid armature operates immersed in system oil. This eliminates the push-pin seal found in dry-armature designs, removing a common wear and leakage path while cushioning spool shift and extending solenoid service life in high-cycle Machine duty. The D24 coil is the standard DC 24 V industrial configuration, chosen for gentle start-up impact, low noise, and dependable shifting under pressure. The M3 suffix adds a manual emergency push rod, allowing technicians to shift the hydraulic valve by hand during commissioning or troubleshooting when power is unavailable.