Rulon J Rulon LR

Rulon J Rulon LR

3 year ago

43 0

Hony Engineering Plastics Limited

 6 year year

Product details

One of the original Rulon compounds, Rulon J is a reinforced material that combines the best in wear and friction properties with superior value.

Gold colored, Rulon J uses a unique filler that adds temperature stability for enhanced wear. It is considered a “shaft-friendly” compound and operates well against soft mating surfaces such as 316 stainless steel, aluminum, mild steel, brass and other plastics.

Rulon J has a PV rating of 7500; which is one of the lowest of all PTFE-reinforced materials. It is ideally suited for start/stop applications where stick/slip must be eliminated. It is not recommended in steam or otherwise wet environments.

When you want low maintenance, self-lubrication, and the lowest coefficient of friction of any PTFE blend, consider Rulon J.

Rulon ® J is dull gold in color and provides one of the lowest coefficient of friction of all Rulons, and provides good wear and abrasion resistance. Because this grade is "all plastic", it can be run on non-ferrous and non-metallic mating surfaces such as 316 Stainless, brass, and other plastics. It is used in both bearing and seal applications, but is generally not suitable for use in alkaline or oxidizing acid solutions. This is the best Rulon grade for aluminum and soft mating surfaces.

Rulon ® J offers a very low coefficient of friction vs. other filled PTFE grades.
Rulon J-4

Rulon

Rulon 1

Key Properties

Excellent for Dry & Vacuum Environments
Low Maintenance
Self-Lubrication
Wash Down and Caustic Resistance
Ideal for Eliminating “Slip Stick”
Very Low Coefficient of Friction vs. Other Filled PTFE Grades
Works Well Against Soft Mating Surfaces Such as 316 Stainless, Aluminum, Mild Steel, Brass and Other Plastics
Maximum Pressure Velocity (continuous)(MPa x m/s): 7,500PV (.35)
Maximum Pressure PSI (Static)(MPa): 750 PSI (6.9)
Maximum Velocity – SFM (no load)m/s): 400 (2)
Shaft Hardness Minimum: Rc25
Shaft Finish Ra µin9 (µm): 8-16 (.2-.4)
Shaft Material: 316 Stainless Steel & Non Ferrous

Limitations

Subject to Creep, Cold Flow
Tight Tolerance Applications
Some chemicals will attack filler, not recommended in steam environments
Contact Us for questions regarding chemical applications

Applications

Anemometers
Appliance Applications
Automotive Applications
Bushings & Bearings
Insulators
Linear Slides
Piston Rings
Printer & Copier Applications
Solenoid Valve Applications
Textile Industry Applications
Thrust Washers
Wear Bands

Color	Dull Gold
Performance	Max Load "P" (psi) Mpa: 750/5.2 Max Speed "V" (fpm) m/s: 400/2.0 Max "PV" (psi-fpm) (Mpa × m/s): 7,500/0.26
Mating Surface Steel and Stainless Steel	Rb25 and higher Aluminum
Environment	Dry, vacuum
Relative Rating (1=Low, 5=High)	Coefficient of friction: 1 Creep resistance: 3 Insulative property: Yes

Rod and Tube	Extruded up to 10' long Molded up to 12" long Extruded 2" max O.D. Molded 47" max O.D. Precision grinding or machining available for some sizes
Sheet and Tape	Tape 38" width max skived up to 1/4" thick Molded up to 24" x 3" thick; max thickness 3" Precision grinding or machining available on thickness

Automatic Molding	Custom bearings Components, near-net
Extrusion	Rods and tubes Specialty profiles
Hand Molding	Rod, sheet, and tube
Machining	Custom machined parts
Skiving	Tapes and thin sheet
Stamping and forming	Seals Washers Bearings and glides

rulon

Rulon J-3

Contact Now

If you are interested in the product, contact 2bvideo.com for more information for more information

To:: Hony Engineering Plastics Limited

Message:

Submit

Disclaimer：

The information of 2bvideo.com limited shown above is provided by the user or collected on the network. Video 2B does not guarantee the authenticity,accuracy and legitimacy of 2bvideo.com limited information. Video 2B does not involve legal relationships and disputes between users arising from transactions other than secured transactions on this website. Disputes shall be settled by you through negotiation. If you are the person in charge or relevant employee of this enterprise, if you find that the enterprise information is incorrect or want to manage thiscompany, please contact us jacklee1558@gmail.com, after you claim the enterprise, you can obtain management permission, publish supplyand demand information, bring consulting orders, and remove page advertisements.

Hony Engineering Plastics Limited

 Audited supplier

6 year

Address: HONGKONG, China Hong Kong

Main Product: Plastics Sheet, Plastics Rod, CNC Plastic Machined Parts , CNC Metal Machined Parts, Plastics Injection Molding, Antistatic Material

 Contact now

Disclaimer：