Product
Product
Supplier
Search
Get Quote
730 people are quoting
Is LED light and UV light the same?
led lighting are different from UV lamps. UV lamps are gas discharge lamps and ultraviolet tubes with a wavelength of 365mm, which belong to ultraviolet light; LED lamps are light-emitting diodes, visible light with a wavelength of 400mm-500mm, which is similar to ordinary lighting.
The differences of both lamps are as follows:
1. UV lamp can cure all brands of phototherapy glue and nail polish glue, LED lamp can not cure phototherapy glue (ie UV glue)
2. UV lamps are ultraviolet lamps, which are harmful to the eyes and skin, and are irreversible, and long-term exposure may cause cancer risks; LEDs are ordinary light, and long-term use will not have the risk of UV lamps.
3. The UV lamp is a gas discharge lamp, which has a limited working life. It needs to be replaced regularly. The LED lamp has a long working life and basically does not need to be replaced.
4. UV lamps consume more power than LED lamps and have higher operating costs.
Litehome LED Sensor batten lights use LED chips, so long-term use will not cause harm to the human body. Our product is equipped with microwave induction, and the following values can be set through the matching remote control：
1. You can set the light value. If the value of the ambient light meets the light value you set, it will not turn on even if there is a moving signal. When the ambient light does not meet the set value, the light will turn on.
2. The waiting time can be set. That is, how long the light stays low luminous after the person walks.
3. Set the delay time, that is, how long the light stays in the fully lit state after the person has left.
4. Set the preset brightness: you can set the full brightness and low brightness.
5. Set the detection range.
6. Remote control distance: You can set the distance range of the remote control sensor.
The following effects are achieved through these settings:
1. When the ambient light is sufficient, theLed Batten Sensor will not turn on even if there is a moving signal. When the ambient light is insufficient, the sensor detects the movement signal and the light will be turned on. After the delay time, if no movement signal is detected, the light will turn off.
· 2. When no movement signal is detected, the light stays low-light level. When the sensor detects the movement signal, the lights turn on The original brightness. After the delay time, if no movement signal is detected, the light will be adjusted to low brightness.
3. When the ambient light is sufficient, the Led Batten with Sensor will not turn on even if there is a moving signal. When the ambient light is insufficient, the sensor detects the movement signal and the light will be turned on. After the delay time, if no movement signal is detected, the light will be adjusted to a set low brightness. After the waiting time, if no movement is detected in the detection area, the light is automatically turned off.
Therefore, our LED Batten Light with sensor is very suitable for warehouses and parking lots.
If you are interested in the product, contact 2bvideo.com for more information for more information
The information of 2bvideo.com limited shown above is provided by the user or collected on the network. Video 2B does not guarantee the authenticity,accuracy and legitimacy of 2bvideo.com limited information. Video 2B does not involve legal relationships and disputes between users arising from transactions other than secured transactions on this website. Disputes shall be settled by you through negotiation. If you are the person in charge or relevant employee of this enterprise, if you find that the enterprise information is incorrect or want to manage thiscompany, please contact us jacklee1558@gmail.com, after you claim the enterprise, you can obtain management permission, publish supplyand demand information, bring consulting orders, and remove page advertisements.
