Product
Product
Supplier
Search
Get Quote
730 people are quoting
Heat shrink wrap around sleeves consists low pre-heated special rubber adhesive and thick-wall irradiated cross linked polyolefin. When heated the backing layer shrinks and the adhesive flows and forms a reliable corrosion protection seal onto metal and adjacent coating surfaces.It installed by wrapping the tape on the pipe joints ,fittings ,bends ,elbows etc .After the shrinking of the tape ,the closure patch should be installed onto the overlap of the tape. it suitable for pipe operating temperature, 60 ℃，80 ℃ and more high temperature.This heat shrinkable materials have other products too, such as 3 LPE Heat shrink sleeves, 2 PE heat shrink tape, 3 LPP wrap around sleeve, HDD heat shrink wrap sleeves , shrinkable tape closure patch and so on.
Features:
Excellent resistance to cathodic disbondment.
Long term corrosion protection.
Non hardening and non cracking.
Fast application and high performance.
Excellent chemical resistance
Excellent resistance to shear forces
Mechanical protection and moisture resistance.
|
Item |
Typical Value |
Typical Value |
Test Method |
|
|
|
HST 60 |
HST 80 |
- |
|
|
Operating Temperature |
Up to 60℃ |
Up to 80℃ |
- |
|
|
Backing |
|
|
|
|
|
Tensile Strength |
23.20 MPA |
23.50 MPA |
ASTM D-638 |
|
|
Elongation at Break |
650% |
600% |
ASTM D-638 |
|
|
Hardness, Shore D |
50 |
52 |
ASTM D-2240 |
|
|
Dielectric Strength |
32 Kv/mm |
32 Kv/mm |
ASTM D-149 |
|
|
Water Absorption |
＜0.1% |
＜0.1% |
ASTM D-570 |
|
|
Volume Resistivity |
2.5 x 1018 ohm.cm |
2.5 x 1018 ohm.cm |
ASTM D-257 |
|
|
Adhesive |
|
|
|
|
|
Item |
Typical Value |
Typical Value |
Test Method |
|
|
|
HST 60 |
HST 80 |
|
|
|
Softening Point |
90℃ |
121℃ |
ASTM E-28 |
|
|
Lap Shear |
2.3MPA @23℃ |
3.5 MPA @23℃ |
ISO 21809 |
|
|
Installed Sleeve |
|
|
|
|
|
Item |
Typical Value |
Typical Value |
Test Method |
|
|
|
HST 60 |
HST 80 |
|
|
|
Peel to Steel |
145N/cm@23℃ |
160N/cm@23℃ |
ASTM D 1000 |
|
|
Cathodic Disbondment |
＜15 mm rad@23℃ |
＜15 mm rad@23℃ |
DIN EN 12068 |
|
|
Impact Resistance |
＞ 15 J |
＞ 15 J |
DIN EN 12068 |
|
|
Indentation Resistance |
＞1.0 mm@65℃ |
＞1.0 mm@65℃ |
DIN EN 12068 |
|
|
Thickness Range |
1.5 mm to 2.9 mm |
|||
|
Width Range |
150 mm to 600 mm |
|||
If you are interested in the product, contact 2bvideo.com for more information for more information
The information of 2bvideo.com limited shown above is provided by the user or collected on the network. Video 2B does not guarantee the authenticity,accuracy and legitimacy of 2bvideo.com limited information. Video 2B does not involve legal relationships and disputes between users arising from transactions other than secured transactions on this website. Disputes shall be settled by you through negotiation. If you are the person in charge or relevant employee of this enterprise, if you find that the enterprise information is incorrect or want to manage thiscompany, please contact us jacklee1558@gmail.com, after you claim the enterprise, you can obtain management permission, publish supplyand demand information, bring consulting orders, and remove page advertisements.
Main Product:
Heat Shrink Sleeves,
Heat Shrink Tape ,
Heat Shrink Wrap Around Sleeves,
Heat Shrinkable Sleeves,
Cold Applied Tape,
Pipe Repair Materials
