Product
Product
Supplier
Search
Get Quote
730 people are quoting
The damping screw is specially developed and also has a flange, which has great advantages both in identifying its direction and in taking up space. More importantly, damping nuts have better seismic performance. And cushioned damping nuts work better.
With cushion damping screw in the pickling acid concentration should be grasped, or it will cause pickling effect is not obvious, when to quench the nut, to use silicate detergent to clean up the surface attachment of impurities, and then carefully to rinse, prevent under the nut above the residual impurities, affect the use effect of damping screw.
The damping screw is in the screw hole of the nut body is injected with composite plastic plug, due to the effect of the damping plug, it can screw the nut and drive the bolt to rotate the bottom of the hole to fully stir the volume, the anchoring effect is good, effectively improve the installation stress of the bolt, improve the support effect of the bolt!
Advantages: can be matched with 400, 500, 600 high strength without longitudinal ribbed steel rod body, compared with cast steel or forged nut can give full play to the performance of bolt, greatly improve the support strength. The torque is well controlled and the scrap bolt caused by poor torque control is greatly reduced
The qualified rate of bolt opening is controlled above 98%.
Damping screws shall be made of carbon structural steel Q235A with tensile strength not less than 375MPa, and their performance and technical requirements shall comply with the provisions of GB/T700.
The surface should be oxidized, smooth and smooth, without cracks, burrs, rust and other product features:
1, large torque, high efficiency, can achieve fast installation.
2, built-in impact mechanism, no reverse torque during operation, safe and reliable.
3, insert type anchor stirrer (anchor cable stirrer), easy to replace, easy to use.
Shenzhen Bergek Technology Co.,Ltd have been specialized in Sheet Metal Fabrication manufacture for many years. Our main products are various kinds of Laser Cutting Service, Sheet Metal Bending. Also including Cnc Machining, etc.
If you are interested in the product, contact 2bvideo.com for more information for more information
The information of 2bvideo.com limited shown above is provided by the user or collected on the network. Video 2B does not guarantee the authenticity,accuracy and legitimacy of 2bvideo.com limited information. Video 2B does not involve legal relationships and disputes between users arising from transactions other than secured transactions on this website. Disputes shall be settled by you through negotiation. If you are the person in charge or relevant employee of this enterprise, if you find that the enterprise information is incorrect or want to manage thiscompany, please contact us jacklee1558@gmail.com, after you claim the enterprise, you can obtain management permission, publish supplyand demand information, bring consulting orders, and remove page advertisements.
