Product
Product
Supplier
Search
Get Quote
730 people are quoting
About SUSTAGLIDE®
SUSTAGLIDE® in an internally lubricated type 6 cast nylon. It exhibits a low coeffient of friction, good wear and abrasion resistance, and is a great choice for sliding applications under heavy loads.
Sustaglide® is a highly modified caprolactum grade, incorporating a lubricating "particulate matrix" that is evenly distributed throughout the polymer that further reduces the sliding coefficient of friction.
Sustaglide® is Green in colour.
This grade has 5 times higher Pressure-Velocity capability over standard Sustamid® PA6 G type.
According to EC and FDA regulations, Sustaglide® is suitable for use in contact with food.
Properties
Specialised sliding additives enable higher loads and sliding face temperatures
Optimum performance - Low coefficient of friction
Optimum performance - Wear capacity Excellent abrasion resistance
Very good mechanical strength
Very good chemical, thermal and low friction properties
Excellent bearing material
Excellent short-term and long-term heat resistance
High stiffness at elevated temperatures
High creep resistance, especially at elevated temperatures
Outstanding toughness
Excellent fatigue behaviour
Good resistance to chemicals
A high PV rating
Very good co-efficient of friction
Excellent electrical insulation properties
Applications
Insulation bushing
Sliding Parts Under High Load: Wear Pressure Plates
Slide Bearings
Journal Bearings
Gears & Sprockets
High speed chain guides that exceed 100 feet per minute
Crane pulleys ( sheaves )
Bearing both in linear and circular
High impact pile driving
Bearing pads
High load packing blocks up to 13 ton per square inch of load bearing
Meat works
Beverage
Truck pads and shackle bushes
Technical Specifications Sustaglide® green
| General properties | |||
| Test Method | Unit | Guideline Value | |
| Density | DIN EN ISO 1183-1 | g / cm3 | 1,14 |
| Water absorption | DIN EN ISO 62 | % | 2,0 |
| Flammability (Thickness 3 mm / 6 mm) | UL 94 | HB / HB | |
| Mechanical properties | |||
| Test Method | Unit | Guideline Value | |
| Yield stress | DIN EN ISO 527 | MPa | 75 |
| Elongation at break | DIN EN ISO 527 | % | 35 |
| Tensile modulus of elasticity | DIN EN ISO 527 | MPa | 3400 |
| Notched impact strength | DIN EN ISO 179 | kJ / m2 | 3,5 |
| Shore hardness | DIN EN ISO 868 | scale D | 81 |
| Thermal properties | |||
| Test Method | Unit | Guideline Value | |
| Melting temperature | ISO 11357-3 | °C | 215 |
| Thermal conductivity | DIN 52612-1 | W / (m * K) | 0,25 |
| Thermal capacity | DIN 52612 | kJ / (kg * K) | 1,70 |
| Coefficient of linear thermal expansion | DIN 53752 | 10-6 / K | 80 |
| Service temperature, long term | Average | °C | -40...110 |
| Service temperature, short term (max.) | Average | °C | 160 |
| Heat deflection temperature | DIN EN ISO 75, Verf. A, HDT | °C | 90 |
If you are interested in the product, contact 2bvideo.com for more information for more information
The information of 2bvideo.com limited shown above is provided by the user or collected on the network. Video 2B does not guarantee the authenticity,accuracy and legitimacy of 2bvideo.com limited information. Video 2B does not involve legal relationships and disputes between users arising from transactions other than secured transactions on this website. Disputes shall be settled by you through negotiation. If you are the person in charge or relevant employee of this enterprise, if you find that the enterprise information is incorrect or want to manage thiscompany, please contact us jacklee1558@gmail.com, after you claim the enterprise, you can obtain management permission, publish supplyand demand information, bring consulting orders, and remove page advertisements.
Main Product:
Plastics Sheet ,
Plastics Rod,
CNC Plastic Machined Parts,
CNC Metal Machined Parts,
Plastics Injection Molding,
Antistatic Material
