Prestressed PHC concrete spun pile machine1

4 year ago

11 0

Taizhou Amitycare International Co.,Ltd.

 1 min year

Product details

A concrete column mould is a tool used in construction to create a mold for pouring concrete into a specific shape and size. The column mold can be used to create a variety of shapes and sizes, including cylindrical, square, or rectangular columns. Once the concrete is poured and set, the mold can be removed, leaving behind a finished column that can be used in a variety of construction projects.Concrete Spun Pile Column Mould is used for concrete pole making. Its mainly manufacture technology is longitudinal tension by steel wires. Then it can squeeze out the excess water in the concrete under the centrifugal force. Thus, it can greatly improve the concrete density and strength.In order to form concrete more quickly to meet the design strength of more than 70%, steam curing can be carried out so as to shorten the mould-releasing cycle.

Prestressed PHC concrete spun pile machine

Inside Ddameter of small end (mm)	Wheelbase(mm)	Wheel Diameter(mm)	Length(m)
300	2000	510	7-11
350	2000	610	7-11
400	2000	610	7-12
450	2000	710	7-12
500	2000	710	7-12
550	2000	810	7-12
600	2000	810	7-15
800	2000	1010	7-15
1000	2000	1210	7-15

Prestressed PHC concrete spun pile machine

1. Saving a great deal of steel, about 30~70% (employing cold drawn steel wire can save 30%~60%; employing high stress steel wire can save 40%~69%).

2. Crack resistance can increase about 3~5 times.

3. Rigidity increases 1~3 times.

4. Reducing the cost (using cold drawn steel wire can reduce 25%~40%; using high stress steel wire can reduce 12%~21%).

5. Good durability, can delay the existence and expansion of cracks.

6, Protect the environment on which human beings depend on for existence, and reduce the deforestation.

Prestressed PHC concrete spun pile machine

Taizhou amity care international co.,ltd is regarded as the foreign trade department of Taizhou xurui

machinery manufacturing co;, all abroad (overseas) tasks and international businesswill be

undertaken by "amity care ".

We are manufacturers of centrifugal spinning machine ,mould ,heading machine ,cutting

machine,cage welding machine , tension jack for pre-stress .feeding machine for different

capacity ,weave welding machine ,sheet cutting machine etc. we also can supply setting up

a new factory full line service . We have already exported various kinds of concrete pile ,

pole and pipe concern making machines to overseas countries and regions such as indonesia

,parkistan,Vietnam ,myanmar ,korea,malaysia ,south african etc .Mideast, Southeastern Asia.

Prestressed PHC concrete spun pile machine

Related Products

Prestressed PHC concrete spun pile machine

FAQ :you want to set up a new factory of concrete pile or pole .pls follow below question

1:How many poles or pile will be produced per day?how many hrs per shift and how many shifts per day?
2:do you have existing land and what size ? Actually, the land size decide the capacitymeet it?
3:Concrete strength,C60(PC) or C80(PHC)?The difference is C80 pole need steam curing by autoclave, higher strength.
4:what diameter of you pile ? what length of your each pile specification ?
5.:What taper ratio of your country pole standard ?same as China 1:75?pls tell me more specification of your poles ? such as length ,diameter.The mould size and price is based on it. For piles , pls tell me diameter and length is enough.
6:What is your budget??And how about automation degree?? Full-automatic need more investment.
7:Local market??Do you have done market research?If the local demand is not big, we will recommend more suitable capacity

1:How many poles or pile will be produced per day?how many hrs per shift and how many shifts per day?

2:do you have existing land and what size ? Actually, the land size decide the capacitymeet it?

3:Concrete strength,C60(PC) or C80(PHC)?The difference is C80 pole need steam curing by autoclave, higher strength.

4:what diameter of you pile ? what length of your each pile specification ?

5.:What taper ratio of your country pole standard ?same as China 1:75?pls tell me more specification of your poles ?
such as length ,diameter.The mould size and price is based on it. For piles , pls tell me diameter and length is enough.

6:What is your budget??And how about automation degree?? Full-automatic need more investment.

7:Local market??Do you have done market research?If the local demand is not big, we will recommend more suitable capacity

Contact Now

If you are interested in the product, contact 2bvideo.com for more information for more information

To:: Taizhou Amitycare International Co.,Ltd.

Message:

Submit

Disclaimer：

The information of 2bvideo.com limited shown above is provided by the user or collected on the network. Video 2B does not guarantee the authenticity,accuracy and legitimacy of 2bvideo.com limited information. Video 2B does not involve legal relationships and disputes between users arising from transactions other than secured transactions on this website. Disputes shall be settled by you through negotiation. If you are the person in charge or relevant employee of this enterprise, if you find that the enterprise information is incorrect or want to manage thiscompany, please contact us jacklee1558@gmail.com, after you claim the enterprise, you can obtain management permission, publish supplyand demand information, bring consulting orders, and remove page advertisements.

Taizhou Amitycare International Co.,Ltd.

 Audited supplier

1 min

Address: Taizhou, China

Main Product: Pile Cage Welding Machine, Electric Concrete Pole Making Machine, Concrete Pipe Mould, Reinforced Concrete Pipe , Steel End Plate, Tension Machine

 Contact now

Disclaimer：