Huizhou Antenk Electronics Co Ltd manufactures short body reverse angle dip USB A receptacle equipped with rear two legs for stable power and high speed data transmission for compact electronic devices. This reverse through hole mount USB female connector adopts UL94 V zero flame retardant insulator housing with optional PBT plus thirty percent glass fiber or LCP material, contact terminals select brass or phosphor copper with multiple gold plating options, shell supports brass iron and stainless steel material choices, insulator color is available in white and black, packaging solutions cover tray bag tube and tape and reel, full dimension parameters can be acquired from engineering drawing for PCB footprint reference, it provides maximum thirty milliohm contact resistance, five hundred volt AC dielectric withstanding voltage for one minute and minimum one thousand megaohm insulation resistance, maximum insertion force reaches thirty five Newton while extraction force ranges from ten to thirty five Newton. Users complete dip through hole soldering following official PCB drawing and mate with standard USB A male plug to establish reliable circuit links for target electronic hardware. Operators must comply with drawing dimensional tolerances for PCB layout avoid excessive plugging force to prevent terminal deformation and keep products in dry storage space to prevent plating layer oxidation. Different from competitors buying external components Antenk implements full in house workflow including plastic molding terminal stamping assembly and complete laboratory performance validation. Our factory holds ISO9001 ISO14001 IATF16949 and UL certifications and more than seventy percent finished goods export worldwide. This USB receptacle applies for digital household appliances storage devices computer peripherals and miniature consumer electronics. Please provide your terminal material shell material insulator color plating grade packing style and project specifications for free sample evaluation and full technical document support.
Rear Two Leg USB Jack delivers enhanced mechanical locking strength when soldered onto printed circuit boards.
Reverse Angle USB Socket optimizes internal space layout for space limited compact electronic equipment.
Through Hole USB Port achieves firm board mounting and stable power data transmission for end devices.
2、Detailed Specifications of UAFR22‑XXXXXX Short Body Reverse Angle Dip USB A Receptacle
1. Mechanical Specifications
1.1 Product type: Short body reverse angle dip USB A receptacle with rear two legs
1.2 Measurement unit: millimeter
1.3 Key dimension: Main outline dimensions refer to engineering drawing. Insulator color supports white and black. Multiple material selections for terminal shell and insulator housing. Available packing forms include tray bag tube and tape and reel. Refer to engineering drawing for full outline dimension and dedicated PCB layout dimensions. Follow drawing specified dimensional tolerances for printed circuit board design.
1.4 Assembly method: Perform through hole dip soldering onto printed circuit board, mate with standard USB A male plug to realize stable power and data transmission.
1.5 Ordering feature: Optional terminal material shell material insulator material insulator color contact plating grade and packaging options to satisfy compact electronic project requirements.
1.6 CTA: Contact our engineering team to obtain complete dimension drawings and ordering specifications for your hardware design validation.
2. Material Construction
2.1 Contact Terminal: Optional brass or phosphor copper, multiple gold plating grades for selection
2.2 Insulator Housing Material: UL94 V zero flame retardant grade, optional PBT plus thirty percent glass fiber or LCP
2.3 Shell Material: Optional brass iron stainless steel
3. Electrical & Mechanical Performance Parameters
3.1 Contact resistance: Maximum 30 milliohm
3.2 Dielectric withstanding voltage: 500 Volt AC for one minute
3.3 Insulation resistance: Minimum 1000 Megaohm
3.4 Insertion force: Maximum 35 Newton
3.5 Extraction force: 10 Newton to 35 Newton
4. Usage Method
4.1 Assembly mode: Complete through hole dip soldering following official PCB layout drawing, pair with standard USB A male plug for reliable power and data signal transmission.
4.2 Operation tip: Adopt PCB layout dimension data shown on engineering drawing for circuit board layout development.
5. Application Scenarios
5.1 Built‑in USB interface for compact digital household appliances
5.2 Power and data port for portable storage devices
5.3 Connecting interface for computer peripheral equipment
5.4 USB signal port for miniature consumer electronic products
6. Operation & Storage Precautions
6.1 Strictly follow drawing dimensional tolerances for PCB footprint design
6.2 Avoid excessive plugging force to prevent permanent deformation of contact terminals
6.3 Prevent scratches dirt and mechanical impact on insulator housing terminals and shell before assembly
6.4 Store products in dry environment to avoid oxidation of plated terminal surfaces
6.5 Confirm terminal material shell material insulator material insulator color contact plating grade and packing type before placing purchase order
6.6 CTA: Submit your hardware requirement terminal material shell material insulator material insulator color plating option packing selection and project information, we provide free sample evaluation and professional technical consultation services.
3.FAQ
Q: How many packaging do you have?
A: We have five packages including PE bag, hand bag, zip lock bag, colorful box and white box currently.
Q: Can you do our own packaging?
A: Yes, you just provide the package design and we will produce what you want. We also have the professional designer can help you do the packaging design.
Q: How many different types of products your company manufactures?
A: Now we have more than 1,000 products. We have a strong advantage of OEM, just give us the actual products or your idea that you want, we will manufacture for you.
4.Product Drawing
