The RDS-3T is the 3000kg member of the RDS hydraulic flip and rotate glass vacuum lifter range, built for large glass curtain wall units that have to be turned from flat to vertical during installation. It hangs from an overhead crane, a jib crane or a monorail hoist — it has no chassis, no drive wheels and no boom of its own, so the vertical lift comes from the crane while the RDS-3T controls the orientation of the panel.
Its hydraulic power system flips the load 90° and rotates it 360°, both driven electrically from the wireless remote, so the operator sets the installation angle from the ground instead of handling the panel by hand. The machine carries the load on a dual pump vacuum system with two suction cups in a crossover configuration, and the vacuum pressure compensation function re-runs the pump whenever vacuum drops below the safe value and returns to power-saving mode once it is recovered — that matters on a 3-tonne load, where a single vacuum decay would otherwise drop a panel of this size. Control is by wireless remote at 50-100m effective range, with a 6m wired control as backup. Power is DC24V from two DC12V 100Ah batteries, charged from AC110-220V.
Product Specifications
| Model |
RDS-3T |
| Rated load capacity |
3000kg (3 Tons) |
| Total power |
1.2 kW |
| Operating voltage |
DC 24V |
| Operating temperature |
-20°C to +40°C |
| Battery |
DC 12V 100Ah × 2 |
| Charging supply |
AC 110-220V, 50Hz / 60Hz |
| Control method |
Wireless remote controller (effective range 50-100m) + 6m wired control |
| Vacuum pressure compensation |
Automatically increases pressure when vacuum pressure drops below the safe value, then enters power-saving mode once the safe value is reached |
| Vacuum system |
Dual pump system, two suction cups connected in a crossover configuration |
| Flip angle |
90° (hydraulic) |
| Rotation |
360° (electric) |
| Warranty |
1 year |
| Payment terms |
T/T |
| Incoterms |
FOB, CIF, EXW |
| MOQ |
1 Set |
| Delivery time |
30 days |
| Packaging |
Flexible package or seaworthy plywood case |
Product Features
1. 3000kg rated capacity, the top of the RDS hydraulic range. It takes a full-size curtain wall unit in one pick rather than a half panel, which means one lift cycle per unit instead of two — on a facade where the crane time is the constraint, that is where the capacity pays for itself.
2. Hydraulic flip 90° and 360° rotation, both electrically driven. A panel goes from flat to vertical, or from vertical to flat, without the operator touching it. The flip is hydraulic rather than manual because at 3 tonnes the load has to be turned under power — the operator sets the angle from the ground on the remote instead of handling a suspended panel.
3. Dual pump system with two suction cups in a crossover configuration. The two circuits are crossed so a leak in one does not open the whole load. On a smaller machine this is a convenience; at 3 tonnes it is the reason a single point failure does not drop the panel.
4. Automatic vacuum pressure compensation. The pump re-cuts in when vacuum drops below the safe value and drops back to power-saving mode once it is recovered. This is what makes a 3-tonne pick hold through a dirty, cold or wet glass surface — the condition where a fixed single-shot pump would lose the load.
5. Wireless remote at 50-100m effective range, plus a 6m wired control as backup. The operator stands clear of a suspended 3-tonne load and out of the fall zone, which is not a convenience on a facade job but a requirement. The wired control is there when the radio path is blocked by a frame or a floor slab.
6. DC24V from two DC12V 100Ah batteries. A full working day of picks without a mains supply at the lift position, so the machine is not tied to the nearest socket on a half-finished floor.
7. -20°C to +40°C operating range. Outdoor site work in cold and hot climates, which is the normal environment for curtain wall installation.
8. Towable in its case. It moves between lift positions without a crane, so one machine can follow a facade across several work positions rather than being locked to one bay.
Maintenance & Safety
Battery care is the one maintenance item that decides whether this machine works on site. If the RDS-3T will not be used for more than one month, either charge the batteries or disconnect them — both DC12V 100Ah packs need a regular charge cycle to stay above their natural discharge point, and a battery left flat for months is the most common cause of a control box that will not power up on site. Beyond that, service the equipment at the recommended intervals and check the vacuum gauge rather than leaving a suspended 3-tonne panel unattended.
Product Summary
The RDS-3T is a 3000kg hydraulic flip and rotate glass vacuum lifter made to hang from a crane, for teams installing large glass curtain wall units who already have an overhead crane, jib crane or monorail hoist at the work position. Rated 3000kg, it flips 90° and rotates 360° under power, carries the load on a dual pump system with two cups in a crossover configuration, and holds vacuum through a pressure compensation function that re-cuts the pump when it drops. The operator works from a wireless remote at 50-100m with a 6m wired control as backup, powered by two DC12V 100Ah batteries, in a -20°C to +40°C range, and it can be towed between lift positions in its case. It has no lifting structure of its own — if you need a machine that reaches height on its own, tell us the height and we will quote the self-supporting range instead. If your panels exceed 3 tonnes, send us the dimensions and weight rather than stretching this one.
Choosing between the two types of glass installation equipment
Most teams buying a glass installation machine for curtain wall work have to make one decision first: does the machine bring its own height, or does it use the crane you already have? The self-supporting suction lifters in our range drive themselves to the panel and raise it from the ground on their own boom, which means one machine covers the whole job — but they need clear floor space beside the facade and they are limited in how far the panel can reach out from the machine. The RDS-3T takes the other half of the answer. It hangs from the crane you already have on site and puts the 3-tonne capacity, the hydraulic flip and the 360° rotation where the panel actually is, which suits tall facades, tight sites and units too large for a self-supporting machine. Tell us what is above the work position and we will tell you which half of the answer you need — and if your site has no crane at all, that changes the answer again.
Frequently Asked Questions
1. Does the RDS-3T need an overhead crane to lift the glass to height?
Yes. The RDS-3T handles the flip and the rotation of a 3-tonne load, but it does not carry its own lifting structure — it has no chassis, no drive wheels and no boom. The vertical lift comes from an overhead crane, a jib crane or a monorail hoist, which carries the load while the RDS-3T controls the panel's orientation. If you need a machine that reaches height on its own, that is a different class of equipment and we will quote the self-supporting range instead.
2. How large a glass unit can one RDS-3T take in a single pick?
The 3000kg rating is the constraint, and you need a safety margin on it. Glass loses rated capacity on curved, low-iron or dirty surfaces, so a 3000kg machine is normally run well below its rating on a real site. Send us the panel dimensions, thickness and glass type and we will confirm what it will hold. Note that the vacuum system uses two suction cups in a crossover configuration — the glass must be flat, since a two-point crossover cup configuration cannot seal against a curved panel.
3. What happens if one suction cup loses vacuum on a 3-tonne load?
Two things protect you. The dual pump system runs two circuits, and the cups are wired in a crossover configuration so a leak in one circuit does not open the whole load. On top of that the vacuum pressure compensation function detects vacuum dropping below the safe value, re-runs the pump to recover it, and only returns to power-saving mode once the safe value is recovered. You still need to monitor the vacuum gauge rather than walk away from a suspended 3-tonne panel.
4. How long does the battery last, and how should it be maintained?
The batteries are warranted for 1 year when maintained according to the maintenance manual. The practical rule is monthly: if the machine is not going to be used for a month or more, either charge the batteries or disconnect them. Both DC12V 100Ah batteries need a full charge cycle on a regular basis to stay above their natural discharge point, and a battery left flat for months is the most common cause of a control box that will not power up on site.
5. How long is the warranty, and what is covered?
One year, and it includes the batteries. If anything fails inside that year we supply the replacement parts at no charge. Wearing and consumable parts are excluded. Spare parts are available for at least 5 years from delivery, supplied at additional charge with price and lead time confirmed per request.
6. How do I get parts and repairs after the warranty?
The lifter uses mostly common hardware parts, so most of what can fail is available from a local hardware supplier or forklift parts shop near you. Where it is not, we supply the part. For repair work itself, even on a 3-tonne hydraulic machine the failure rate is low, and we can walk your technician through the procedure by video and send repair instructions — send us the model, the symptom and a photo of the control box and we will respond.
7. What are the payment terms and delivery time?
T/T. Incoterms are FOB, CIF or EXW, MOQ is 1 set. Production and delivery take 30 days, packed either as a flexible package or a seaworthy plywood case depending on the routing.
8. Is the 3000kg rating really 3000kg, or more?
3000kg is the rated capacity for this model. Larger capacities exist in the Cowest range on a different frame and vacuum configuration — if your panels exceed 3 tonnes, send us the dimensions and weight and we will quote the right machine rather than stretch this one.