1.Product Description：
Huizhou Antenk Electronics Co Ltd manufactures dual row one hundred eighty degree straight wafer connector with four point two zero millimeter pitch to deliver stable wire to board power and signal interconnection for printed circuit board assemblies. This dip type wafer connector uses multiple optional flame retardant nylon 66 or LCP PA9T insulator material and brass contact pins, it supports two to twenty four pole configurations, diverse tin plated and gold flash plating selections as well as varied housing color and packing options, full dimension parameters can be obtained from engineering drawing for PCB footprint reference, it provides seven amp rated current, six hundred volt AC DC rated voltage, one thousand five hundred volt per minute dielectric withstanding voltage, insulation resistance above one thousand megaohm and contact resistance below twenty milliohm and operates reliably from minus twenty five degree Celsius to plus eighty five degree Celsius. Users complete through hole dip soldering following official PCB drawing and mate with matching dual row receptacle to establish dependable circuit links for target electronic hardware. Operators must observe drawing dimensional tolerances for PCB layout avoid excessive mating force to prevent brass pin deformation and store goods in dry surroundings to protect plating layers against oxidation. Unlike competitors purchasing outsourced parts Antenk performs full in house workflow covering plastic molding terminal stamping assembly and comprehensive laboratory performance validation. Our factory holds ISO9001 ISO14001 IATF16949 and UL certifications and more than seventy percent finished goods export globally. This wafer connector suits household appliances power supply units and industrial control equipment. Please share your pole count insulator material plating choice and project specifications for free sample evaluation and complete technical document support.
High Current Wafer Connector delivers stable power transmission under seven amp working current for household appliances and industrial control hardware.
Dual Row Wire Socket achieves reliable wire to board interconnection and supports multiple pole configurations for diverse electronic assembly projects.
Straight Dip Wire Connector adopts through hole dip soldering process and fits standard PCB layout for convenient mass production assembly.
2.Detailed Specifications of AW4202VT‑2xNP‑XXXX 4.20 mm 180 Degree Dual Row Wafer Connector
1. Mechanical Specifications
1.1 Product type: Dual row one hundred eighty degree through hole wafer connector
1.2 Measurement unit: millimeter
1.3 Key dimension: Pitch is 4.20 millimeter, pole quantity ranges from 2 poles to 24 poles. Refer to engineering drawing for outline dimension and dedicated PCB layout dimensions. Apply drawing standard dimensional tolerances for unspecified dimensions during printed circuit board design. Multiple housing material color options are supported.
1.4 Assembly method: Perform through hole dip soldering onto printed circuit board, mate with matching AH4201 dual row receptacle to realize wire to board power and signal interconnection.
1.5 Ordering feature: Multiple insulator housing material options, various tin plated and gold flash plating grades, diverse housing color and packing styles for customized project requirements.
1.6 CTA: Contact our engineering team to obtain complete dimension drawings and ordering specifications for your hardware design validation.
2. Material Construction
2.1 Contact Pin Material: Brass
2.2 Insulator Housing Material: Nylon 66 UL94 V‑2 or UL94 V‑0, alternative materials include LCP and PA9T with different flame retardant grades for selection
3. Electrical & Environmental Performance Parameters
3.1 Current rating: 7 Amp AC DC
3.2 Voltage rating: 600 Volt AC DC
3.3 Dielectric withstanding voltage: 1500 Volt AC per minute
3.4 Insulation resistance: Minimum 1000 Megaohm
3.5 Contact resistance: Maximum 20 milliohm
3.6 Operating temperature range: Minus 25 degree Celsius to plus 85 degree Celsius
3.7 Compliance: Meets RoHS and HSF environmental requirements
4. Usage Method
4.1 Assembly mode: Complete through hole dip soldering following official PCB layout drawing, connect with matched dual row receptacle to achieve stable power and signal transmission.
4.2 Operation tip: Adopt PCB layout dimension data shown on engineering drawing for circuit board layout development.
5. Application Scenarios
5.1 Wire to board power connection for household home appliances
5.2 Internal signal interconnection for power supply units
5.3 Power and signal interface for industrial control equipment
5.4 General wire to board interconnection for common electronic hardware
6. Operation & Storage Precautions
6.1 Strictly follow drawing dimensional tolerances for PCB footprint design
6.2 Avoid excessive mating force to prevent permanent deformation of brass contact pins
6.3 Prevent scratches dirt and mechanical impact on insulator housing and brass pins before assembly
6.4 Store products in dry environment to avoid oxidation of plated surfaces
6.5 Confirm pole count housing material plating grade housing color and packing type before placing purchase order
6.6 CTA: Submit your hardware requirement material plating options and project information, we provide free sample evaluation and professional technical consultation services.
3.FAQ
Q: How many packaging do you have?
A: We have five packages including PE bag, hand bag, zip lock bag, colorful box and white box currently.
Q: Can you do our own packaging?
A: Yes, you just provide the package design and we will produce what you want. We also have the professional designer can help you do the packaging design.
Q: How many different types of products your company manufactures?
A: Now we have more than 1,000 products. We have a strong advantage of OEM, just give us the actual products or your idea that you want, we will manufacture for you.
4.Product Drawing：
