glass cutting machine.mp4

glass cutting machine.mp4

4 year ago

8 0

JINAN KATION TRADING CO.,LTD

 1 min year

Product details

Automatic glass cutting line

1. Basic working principle:

It is mainly used for automatic glass loading. After putting the glass in the designated position and giving the signal of loading, the big arm turns up about 95 degrees through the overturning mechanism, and the whole machine starts to move forward. When the induction device on the small arm touches the glass, the whole machine stops walking and the glass is sucked by the suction cup through the vacuum system on the glass,small arm lifting motor lifts the glass upward and backward about 80 mm. The walking motor retreats and the big arm falls down. When the bing arm is in place, the suction cup under the glass begins to blow. When the small arm falls down, the glass falls on the conveyor wheel. Finally, the glass is conveyed to the cutting table by the conveyor wheel.

1) 、Flip sprocket chain: high precision wear-resisting reinforced;；

2) 、Conveying rollers: PU material;；

3) 、Vacuum suction cup: Nitril rubber material(Double Adsorption Structure)；

4) 、Flip reducer: Bangfeili/zhongyan

5) 、X & Y aixs reducer: Bangfeili/zhongyan

6) 、Conveying reducer:Bangfeili/zhongyan

7) 、Sucker lifting reducer:Sankai/zhongyan

8) 、Vacuum pump:Jiuxin

Electrical appliance configuration:

1）、PLC controller:Delta;

2)、Frequency converter:Delta;

3）、Touching screen:Delta;

4）、Contactor switch:Schneider;

5）、Circuit breaker: Chint,;

6）、Switching power supply: Delta;

7）、Control transformers: Chint,;

8）、Main electromagnetic valve: Airtac;

9）、Photoelectric switch:Guangchuan/puruide/aotongmike；

10）Proximity switch:Guangchuan/puruide/aotongmike；

Note: Depending on the delivery date and technical improvement, the production company reserves the right to replace the parts of the same level brand.

Technical parameter：

1) 、Sheet size: Min size: 2400 *1500mm (Single Side loading)

2) 、Max loading size: 6100 x 3300 mm

3) 、Glass sheet thickness: 3 ~ 19mm

4) 、Working absorption depth: 700 mm

5) 、X-axis walking speed: 5-25m/min (adjustable)

6) 、Y-axis walking speed: 8-12 m/min (adjustable)

7) 、Conveying speed: 5-25m/min (adjustable)

8) 、Number of flip arms: 12 arms (double side loading)

9) 、Number of single arm suckers: three

10) 、Loading type:Double side loading

11) 、Working cycle: 60S (30S for each additional position)

12) 、Installation power supply: AC380V/50HZ (special circumstances can be adjusted according to customer requirements)

13) 、Installation total power: 8-17 kw

14) 、Compressed air: 0.6-0.8 Mpa;

15) 、Vacuum: -50-99 Kpa (adjustable according to glass thickness)

16) 、Working table height: 900 + 20mm

17) 、Machine size: 4650 x 2980 x 900mm

Technical description：

1) The alarm system: with reliable vacuum detection device, to appear abnormal situation can be automatic alarm and display, can be used to control when abnormal and confirmed The vacuum alarm when abnormal and guarantee under the glass in the vacuum state; When the emergency stop to ensure the vacuum suction cups in a glass in the vacuum state, avoid Avoid glass damage due to abnormal downtime;

2)The operation pattern: the device has automatic mode and manual mode two functions for selection, operation convenient and intuitive;

3)The operating interface: LCD touch-screen display, Chinese display, convenient operation;

4)The main frame, and steel structure all use international quality rectangular pipe compound links and bolt assembly; Rectangular steel tube thickness :over3-8mm

5) The material of the machine has been aged, the surface has been rust-removing technology to remove rust spots and surface oxide layer, the bottom layer has been sprayed with high-grade epoxy primer, and the surface has been sprayed with high-grade automobile paint.

Other Insulating Glass Equipment of our company:

1.Insulating Glass Production Line
2.Spacer Bending Machine
3.Desiccant Filling Machine
4.Butyl Extruder Machine
5.Insulating Glass Sealing Robot
6.Glass Washing Machine