1.Product Description
Huizhou Antenk Electronics Co Ltd manufactures one point two five millimeter pitch wire connector housing for reliable wire to board interconnection within compact electronic equipment. This white connector housing is constructed from Nylon 66 material with UL94 V zero flame retardant rating, it fits AT1251T series crimp terminals and mates with AW1251 series wafer, multiple pole options are available and complete dimension reference data can be obtained from official engineering drawing for mechanical design validation. It supports one ampere AC DC rated current and one hundred twenty five volt AC DC rated voltage, delivers five hundred volt AC per minute withstanding voltage and one hundred megaohm minimum insulation resistance, operating temperature ranges from minus forty degree Celsius to one hundred and five degree Celsius and fully complies with RoHS and REACH environmental standards. Users assemble crimped terminals into housing and complete locking connection with matching wafer to realize stable signal and power transmission. Operators should follow drawing dimensional tolerances for mechanical design avoid excessive force during terminal insertion to prevent housing crack and store goods in dry clean environment to keep plastic performance stable. Unlike competitors buying outsourced plastic parts Antenk carries out full in house workflow covering plastic molding quality inspection and comprehensive laboratory performance testing. Our factory holds ISO9001 ISO14001 IATF16949 and UL certifications and more than seventy percent finished goods export worldwide. This housing suits industrial control instruments digital household appliances display modules and consumer electronic equipment. Please share your pole count and project specifications for free sample evaluation and complete technical drawing support.
White Nylon Housing features UL94 V zero flame retardant property to secure stable performance in various electronic assembly scenarios.
Crimp Terminal Housing accommodates matched crimp terminals to build steady wire to board circuit interconnection for compact devices.
RoHS Compliant Housing meets global environmental requirements and can be widely applied for export oriented electronic product projects.
2.Detailed Specifications of AH1251‑xP 1.25mm Pitch Connector Housing
1. Mechanical Specifications
1.1 Product type: 1.25 millimeter pitch plastic connector housing
1.2 Measurement unit: millimeter
1.3 Key dimension: Refer to official engineering drawing and dimension table for complete outline sizes. Multiple pole positions are supported. Follow drawing dimensional tolerances for mechanical design. This housing fits AT1251T series terminals and mates with AW1251 series wafer connector. Insulator color is white.
1.4 Assembly method: Insert crimped AT1251T series terminals into housing, then lock together with matched AW1251 series wafer to achieve stable wire to board power and signal transmission.
1.5 Ordering feature: Selectable pole quantity to satisfy various wire to board assembly requirements for electronic projects.
1.6 CTA: Contact our engineering team to obtain complete dimension drawings and ordering specifications for your hardware design validation.
2. Material Construction
2.1 Housing Material: Nylon 66, flame retardant grade UL94V‑0
3. Electrical & Environmental Performance Parameters
3.1 Rated current: 1 Ampere AC DC
3.2 Rated voltage: 125 Volt AC DC
3.3 Withstanding voltage: 500 Volt AC per minute
3.4 Insulation resistance: Minimum 100 Megaohm
3.5 Operating temperature range: -40℃ to +105℃
3.6 Environmental compliance: Meets RoHS and REACH requirements
4. Usage Method
4.1 Assembly mode: Load crimped AT1251T series terminals into housing cavity and engage with compatible AW1251 series wafer for reliable wire to board interconnection.
4.2 Operation tip: Use dimension values shown on engineering drawing for product mechanical structure design.
5. Application Scenarios
5.1 Wire to board signal and power connection for industrial control equipment
5.2 Internal wiring assembly for digital household appliances
5.3 Connection accessory for display related modules
5.4 Wiring component for consumer electronic and precision instrument products
6. Operation & Storage Precautions
6.1 Adhere strictly to drawing dimensional tolerances during mechanical design
6.2 Avoid excessive insertion force when loading terminals to prevent housing cracking or deformation
6.3 Prevent scratches dirt and mechanical impact on plastic housing before assembly
6.4 Store products in dry environment to preserve original plastic material performance
6.5 Confirm pole quantity before placing purchase orders
6.6 CTA: Submit your hardware requirement pole quantity and project information, we provide free sample evaluation and professional technical consultation services.
3.FAQ
Q: How many packaging do you have?
A: We have five packages including PE bag, hand bag, zip lock bag, colorful box and white box currently.
Q: Can you do our own packaging?
A: Yes, you just provide the package design and we will produce what you want. We also have the professional designer can help you do the packaging design.
Q: How many different types of products your company manufactures?
A: Now we have more than 1,000 products. We have a strong advantage of OEM, just give us the actual products or your idea that you want, we will manufacture for you.
4.Product Drawing
